JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion

JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion (https://www.jk-forum.com/forums/)

- Stock JK Tech (https://www.jk-forum.com/forums/stock-jk-tech-12/)

- - Riddler Diff covers (https://www.jk-forum.com/forums/stock-jk-tech-12/riddler-diff-covers-244606/)

Greentrib

08-18-2012 12:50 PM

Riddler Diff covers

3 Attachment(s)

So I got my Riddler Dana 44 Diff covers in yesterday and I'm not very impressed in there quality. Very rough and pitted and the mating edge is not flat and has a big grinder oops on it. Are they all like this? :mad: :thinking:

Attachment 355558 Attachment 355559 Attachment 355560

CommandoOkie

08-18-2012 12:52 PM

1 Attachment(s)

Mine were like that and held up great.

Mudbob

08-18-2012 01:07 PM

yes mine was like that too. not made to look nice at all.

Greentrib

08-18-2012 02:28 PM

I'm going to return the one that has a big grinder dig in it. I expected better quality for $100 each.

Emmeljk11

08-18-2012 03:43 PM

1 Attachment(s)

Quote:

Originally Posted by jimmydarnell

Mine were like that and held up great.

Twins sir haha

Attachment 355636

RedJK2

08-19-2012 12:52 AM

Quote:

Originally Posted by Greentrib

I'm going to return the one that has a big grinder dig in it. I expected better quality for $100 each.

Where did you buy them? Hopefully it won't be an issue to exchange it. An issue like this could cause a gear oil leak. It should not look like this.

Seakin

08-19-2012 10:35 AM

Mine looked like that to.
They can really take abuse on the trail. I've landed on mine a few times with no issues.

OH9JK

08-19-2012 10:54 AM

I expect they are sand cast and not really supposed to be a "pretty" part anyhow. The machining is a bit rough...I would either hit it with a flat file or send back for replacement.

:beer:

All times are GMT -8. The time now is 12:12 PM.