SOONERJEEP

Looking for parts for a 4wd conversion. Like many others I was going to build up to Rubicon but I tired of waiting and can upgrade later. So d30, d44, transfer case, drive shaft, tcase crossmember. Just let me know what you have and how much. I live in Tulsa but will pay shipping or drive to p/u. Everything would need to be straight. I'm not concerned about gearing, I have 3:21 right now but have a 4:88 for my rear ready to install.

SOONERJEEP

I've found everything but an axle. I can find parts if someone has a housing.
Bump

u-joint

I don't have a housing... But...

I wanted to drop in and tell you that if you do this, let me know... Id LOVE to help you. This sounds awesome!!!

BrowniesJK

Keep us posted on the build. I have most of my parts and should be starting mine the last week of March.

HBC

I don't have what you need, but I know they're out there. When you pull the non-drive axle what are your plans for it? I've been kicking around the idea of putting one under a trailer for camping. Let me know if you'd be interested in getting rid of it. Good luck with the build!

BrowniesJK

Ok so I'm a couple of months behind but the project starts today.
I'll post some pics when I'm done with stage 1 ( axel swap )