Completing an LS6 / TJ Build - Up
A big part of any all-out custom build is getting started: selecting and assembling the main components. Bigger still is completion - bringing everything together and making all the parts work together. That's what we were tasked to do with this extreme-green TJ build-up.
Critical specs:
LS6 Corvette crate motor
Turbo 400 Transmission
Atlas transfer case
Taking delivery of the Jeep


I think this is about 1/3rd of the parts...

We'll be using PSC hardware in the power steering assist:


The interior - started pretty bare. Note Poison Spyder's cage. Corrbeau seats added complete with harnesses.


The heart of the beast - still a lot to do but this aluminum Corvette motor should provide plenty of power.

(tight against the firewall)


Full custom exhaust in progress...

(muffler mock-up next to the atlas)

I'll try to keep this as up-to-date as possible.
Thanks!
Critical specs:
LS6 Corvette crate motor
Turbo 400 Transmission
Atlas transfer case
Taking delivery of the Jeep


I think this is about 1/3rd of the parts...

We'll be using PSC hardware in the power steering assist:


The interior - started pretty bare. Note Poison Spyder's cage. Corrbeau seats added complete with harnesses.


The heart of the beast - still a lot to do but this aluminum Corvette motor should provide plenty of power.

(tight against the firewall)


Full custom exhaust in progress...

(muffler mock-up next to the atlas)

I'll try to keep this as up-to-date as possible.
Thanks!
As promised, more pictures of Extreme Green.
Purple woven composite look for the center dash bezel:

More green!

Coilovers - I think we may swap the setup around a bit...

More detailed view of the motor:

The bezel from earlier installed - still a ways to go on the rest of the dash:

View from the rear, check out the backup light and carrier setup..

More pics to follow...
Purple woven composite look for the center dash bezel:

More green!

Coilovers - I think we may swap the setup around a bit...

More detailed view of the motor:

The bezel from earlier installed - still a ways to go on the rest of the dash:

View from the rear, check out the backup light and carrier setup..

More pics to follow...



...... seriously though, great looking rig. Definately looking well built, just a little too loud for me color wise.
Very nice setup as of now, I can't wait to see it completed.