Notices
JK Axles, Gears & Drivetrain This forum is dedicated for the selling of factory and aftermarket Jeep JK Wrangler axles, gears and drive train components. This would include things such as lockers, limited slip differentials, axle shafts, U-joints, drive shafts and complete axle assemblies.

Rubi ELocker Front and/or Rear

Old Mar 17, 2015 | 01:43 PM
  #1  
GOJOHNNYGO's Avatar
Thread Starter
JK Freak
 
Joined: Feb 2010
Posts: 910
Likes: 0
From: Birmingham
Default Rubi ELocker Front and/or Rear

SOLD SOLD SOLD

I have both of the Rubi ELocker carriers and only 1 electromagnet I could deem as "good" so if you only need one, swap it to whichever side you need.

The other electromagnet has been damaged by a faulty install, but it still works.

Both of these came out of running axles and worked fine. I bench tested the "broken" magnet (blue wires) to see if it worked.

I would prefer to sell all these as a set if possible. I kept them as spares in case mine broke and no longer need them.

I'd like to get $900 for the set SHIPPED to your door in the lower 48.

PM or text me at 205 fivefivetwo 46 48

Click image for larger version

Name:	IMG_0739.jpg
Views:	280
Size:	29.2 KB
ID:	601722

Click image for larger version

Name:	IMG_0742.jpg
Views:	246
Size:	25.1 KB
ID:	601723

Click image for larger version

Name:	IMG_0743.jpg
Views:	211
Size:	26.5 KB
ID:	601724

Click image for larger version

Name:	IMG_0747.jpg
Views:	200
Size:	39.6 KB
ID:	601725

Click image for larger version

Name:	IMG_0748.jpg
Views:	198
Size:	38.6 KB
ID:	601726

SOLD SOLD SOLD

Last edited by GOJOHNNYGO; Apr 14, 2015 at 08:10 AM.
Reply
Old Mar 17, 2015 | 02:06 PM
  #2  
ronjenx's Avatar
JK Jedi Master
15 Year Member
 
Joined: Feb 2008
Posts: 12,907
Likes: 185
From: Maine
Default

Can you post a close-up of the actuator ring on the other side of each magnet?
Reply
Old Mar 17, 2015 | 02:21 PM
  #3  
GOJOHNNYGO's Avatar
Thread Starter
JK Freak
 
Joined: Feb 2010
Posts: 910
Likes: 0
From: Birmingham
Default

Originally Posted by ronjenx
Can you post a close-up of the actuator ring on the other side of each magnet?
Absolutely, standby...
Reply
Old Mar 17, 2015 | 02:26 PM
  #4  
GOJOHNNYGO's Avatar
Thread Starter
JK Freak
 
Joined: Feb 2010
Posts: 910
Likes: 0
From: Birmingham
Default

Both are nice and flat, you can still see the machine marks in them. Nothing has eaten into them like you typically see with a failure of the locker.

Click image for larger version

Name:	IMG_0756.jpg
Views:	120
Size:	31.8 KB
ID:	601732

Click image for larger version

Name:	IMG_0757.jpg
Views:	115
Size:	37.3 KB
ID:	601733

Click image for larger version

Name:	IMG_0759.jpg
Views:	116
Size:	20.6 KB
ID:	601734

Click image for larger version

Name:	IMG_0760.jpg
Views:	113
Size:	40.1 KB
ID:	601735
Reply
Old Mar 17, 2015 | 02:33 PM
  #5  
GOJOHNNYGO's Avatar
Thread Starter
JK Freak
 
Joined: Feb 2010
Posts: 910
Likes: 0
From: Birmingham
Default

Sorry, noticed those were a touch blurry, had to break out the macro lens...

Click image for larger version

Name:	IMG_0761.jpg
Views:	119
Size:	29.1 KB
ID:	601737

Click image for larger version

Name:	IMG_0762.jpg
Views:	114
Size:	27.4 KB
ID:	601738
Reply
Old Mar 17, 2015 | 02:44 PM
  #6  
ronjenx's Avatar
JK Jedi Master
15 Year Member
 
Joined: Feb 2008
Posts: 12,907
Likes: 185
From: Maine
Default

Thanks for posting the pics of the rings.
Those rings look new. That's a key feature for a properly functioning locker.
Reply
Old Mar 18, 2015 | 05:46 AM
  #7  
GOJOHNNYGO's Avatar
Thread Starter
JK Freak
 
Joined: Feb 2010
Posts: 910
Likes: 0
From: Birmingham
Default

Originally Posted by ronjenx
Thanks for posting the pics of the rings.
Those rings look new. That's a key feature for a properly functioning locker.
No problem, thanks Ron!
Reply
Old Mar 19, 2015 | 05:14 AM
  #8  
GOJOHNNYGO's Avatar
Thread Starter
JK Freak
 
Joined: Feb 2010
Posts: 910
Likes: 0
From: Birmingham
Default

Morning bump. I'm sure someone out there needs one or needs some spares!
Reply
Old Mar 23, 2015 | 05:39 AM
  #9  
GOJOHNNYGO's Avatar
Thread Starter
JK Freak
 
Joined: Feb 2010
Posts: 910
Likes: 0
From: Birmingham
Default

Bump! Anyone looking for spares?
Reply
Old Mar 23, 2015 | 08:10 AM
  #10  
Crossman100's Avatar
JK Newbie
 
Joined: Jul 2012
Posts: 88
Likes: 0
From: Gunnison, Co
Default

Dang! I guess I got a heck of a deal

Last edited by Crossman100; Sep 15, 2015 at 10:03 AM.
Reply


All times are GMT -8. The time now is 10:34 AM.