JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion

Notices
JK Electrical, Lighting & Sound Systems Bulletin board forum regarding topics such as stereo head units, CD players, MP3 players, speaker systems, amplifiers, hardmounted GPS devices, computers, headlight upgrades, fog lights, off-road lights, general wiring and anti-theft devices.

Hella 500s Stopped Working

Thread Tools
 
Old May 25, 2011 | 07:45 PM
Share
  #11  
tazzdogsocal's Avatar
tazzdogsocal
JK Enthusiast
 
Joined: Jun 2009
Posts: 332
Likes: 0
From: valleycenter CA
Default
dont bypass...., the swich cant handle the wattage
Reply
0
Old May 25, 2011 | 07:49 PM
Share
  #12  
aermotor's Avatar
aermotor
Thread Starter
JK Freak
 
Joined: Aug 2010
Posts: 731
Likes: 2
From: Los Angeles, CA
Default
I'm getting 12v all the way to the switch when it's on, but I guess it's not getting back up to the lights. Is this a wiring issue or relay or something else?
Reply
0
Old May 25, 2011 | 07:51 PM
Share
  #13  
tazzdogsocal's Avatar
tazzdogsocal
JK Enthusiast
 
Joined: Jun 2009
Posts: 332
Likes: 0
From: valleycenter CA
Default
you have a meter, sounds like its the relay it can click and be bad , check the wire from light to relay for 12v .
Reply
0
Old May 25, 2011 | 07:55 PM
Share
  #14  
aermotor's Avatar
aermotor
Thread Starter
JK Freak
 
Joined: Aug 2010
Posts: 731
Likes: 2
From: Los Angeles, CA
Default
I realized I have a ceramic fuse on the main red line from the battery as opposed to the original filament style. Will this matter? Its the same rating.
Reply
0
Old May 25, 2011 | 08:03 PM
Share
  #15  
aermotor's Avatar
aermotor
Thread Starter
JK Freak
 
Joined: Aug 2010
Posts: 731
Likes: 2
From: Los Angeles, CA
Default
I'm going from the 2 black wires off the lights and the 1 black from the relay that attaches to those, then to the red, green and yellow right on the relay and am not seeing anything with the switch turned on.

Does that sound right?
Reply
0
Old May 25, 2011 | 08:04 PM
Share
  #16  
tazzdogsocal's Avatar
tazzdogsocal
JK Enthusiast
 
Joined: Jun 2009
Posts: 332
Likes: 0
From: valleycenter CA
Default
no ... 55watt x2=110 / 112v = 9.1 amp's so 15amp fuse will be fine im a post down
Last edited by tazzdogsocal; May 25, 2011 at 08:07 PM.
Reply
0
Old May 25, 2011 | 08:08 PM
Share
  #17  
tazzdogsocal's Avatar
tazzdogsocal
JK Enthusiast
 
Joined: Jun 2009
Posts: 332
Likes: 0
From: valleycenter CA
Default
they worked before ??
Reply
0
Old May 25, 2011 | 08:14 PM
Share
  #18  
aermotor's Avatar
aermotor
Thread Starter
JK Freak
 
Joined: Aug 2010
Posts: 731
Likes: 2
From: Los Angeles, CA
Default
Sorry just went back and tried again. Removed the relay and stuck my volt meter right in the yellow wire plug and boom, 12v came up, so I think you're right in thinking the relay is bust.

I'll get a new one tomorrow and see what's up. Thanks!
Reply
0
Old May 25, 2011 | 08:17 PM
Share
  #19  
tazzdogsocal's Avatar
tazzdogsocal
JK Enthusiast
 
Joined: Jun 2009
Posts: 332
Likes: 0
From: valleycenter CA
Default
ok looked up wire diagram with the dash switch on-the green and the red to the lights have 12v- switch off the yellow & white only have 12v.
Reply
0
Old May 25, 2011 | 08:22 PM
Share
  #20  
tazzdogsocal's Avatar
tazzdogsocal
JK Enthusiast
 
Joined: Jun 2009
Posts: 332
Likes: 0
From: valleycenter CA
Default
cool 10$ for a bosch relay a couple connectors- your gold
Reply
0



Advanced Search

All times are GMT -8. The time now is 01:54 PM.