Locating a TIPM (Backordered modules)
Sorry been off for a while. Circuit board blackened. Chip black and cracked. Wish I had taken a picture. Replaced component and it worked fine, customer has not come back was probably 6 or 8 months ago now. Assuming it is usually the same problem on all these TIPM units. If you have a broken one pull the covers (?) off and send me a picture. The one I received had nothing covering the circuit board.
This thread has some pictures of the boards. Copy one and see if you can pick out the component that went bad on the TIPM you repaired.
If you want a close-up, I can pm one to you.
https://www.jk-forum.com/forums/show...OEM-TIPM-Study
The picture that shows the "brain" of the TIPM, vertical circuit board, right hand side, just over half way down 4 black integrated circuits with pins coming out on one side. Looks like the voltage regulators I replaced (one of them) was burnt and cracked. Send me that picture if you are not sure and I will high light it on computer and email back (on iPhone)
The picture that shows the "brain" of the TIPM, vertical circuit board, right hand side, just over half way down 4 black integrated circuits with pins coming out on one side. Looks like the voltage regulators I replaced (one of them) was burnt and cracked. Send me that picture if you are not sure and I will high light it on computer and email back (on iPhone)
Do you remember which one in the line?
The picture that shows the "brain" of the TIPM, vertical circuit board, right hand side, just over half way down 4 black integrated circuits with pins coming out on one side. Looks like the voltage regulators I replaced (one of them) was burnt and cracked. Send me that picture if you are not sure and I will high light it on computer and email back (on iPhone)
ik it’s been a few years but you think you can still help me with mine?



