2013 JKU
Ok Got a set of 12/24v Military style Lights NIB (military style connectors)
Bench tested them straight to 12 volt auto battery. Worked great!
On the jeep - installed the Rigid anti flickr (PN 55006), I built adapters between that and the light (checked for 12v, Running 13.8v, just key on 12.5v)
When I connect the lights nothing. When I asked JW Speaker (before the install they said they should work just fine. Im stumped

 

I'm not sure what year the lights are.. Another Odd thing is the adaptors (anti flicker) show 12v on both circuits when just the low beam is on..... ??

 

Operator error! Feel super stupid. I had assumed that green was ground on the adaptors and it wasn't.

Moral to the story always start with the basics. KISS!