Where to mount rocker switches
#1
JK Newbie
Thread Starter
Join Date: Dec 2014
Location: Pennsylvania
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Where to mount rocker switches
Going to be picking up the ARB High Output compressor and led lights in the future and was looking at rocker switch options. Was going to get the Daystar rocker switch panel to get rid of the cargo net by the shifter but saw it won't work with the manual. Other then above the rear view mirror (cb is mounted there) or the A pillar, any other options?
#6
JK Newbie
Thread Starter
Join Date: Dec 2014
Location: Pennsylvania
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
#7
JK Freak
The Rugged Ridge A-pillar mount, with OTRATTW switches is the cleanest way to go. Dozens of posts on this subject.
You can get the RR mount from multiple vendors, but here is one:
Rugged Ridge Black Wrangler A Pillar Switch Pod Left Side 17235.58 (11-15 Wrangler JK) - Free Shipping
You can get the RR mount from multiple vendors, but here is one:
Rugged Ridge Black Wrangler A Pillar Switch Pod Left Side 17235.58 (11-15 Wrangler JK) - Free Shipping
Trending Topics
#8
JK Enthusiast
Join Date: Jan 2015
Location: Frederick, MD
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
#9
JK Enthusiast
Join Date: Feb 2012
Location: Sunland, CA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
I mounted a rocker for some flood lights just above the drivers side speaker.
The rocker was large diameter so i drilled a hole with a unibit.
the side panel comes off real easy.
The rocker was large diameter so i drilled a hole with a unibit.
the side panel comes off real easy.
#10
JK Enthusiast
Join Date: Feb 2012
Location: Sunland, CA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Not sure why the jkforum app rotated my photos counter clockwise but its a pretty straight forward install. Just ask if you have questions
Last edited by Angry_Fisherman; 06-19-2015 at 10:51 PM.