Notices
JK Garage - Member Builds Post your Jeep builds here and share your experiences on the build with the JK-Forum community.

ReconJeep's 2016 JKUR build

Old May 31, 2017 | 07:17 AM
  #161  
ReconJeep's Avatar
Thread Starter
JK Enthusiast
 
Joined: Oct 2008
Posts: 409
Likes: 0
From: Raleigh,NC
Default





After wheeling this weekend I realized that the other day that I ramped the tuck, I hadn't disconnected the sway bar. So I run back down to 4Wheel Parts to ramp it. I also wanted to check a couple of potential issues. It ramped quite a bit more than the other day.



Discovered I had hammered the steering stabilizer. Will have to get some clearance mounts.



Also discovered that rear drive shaft flange rubs on the TJM fuel tank skid. Not a big deal because it's smooth on smooth so it will wear itself clear. I may break out the BFH and help add some clearance.

Other than that, all looks great. Skids did their job protecting everything. Especially the EVO exhaust crossover skid. Had I not had it, I would probably have a crushed tube.

"Ex Umbris Venimus"
Reply
Old Jun 14, 2017 | 08:55 AM
  #162  
ReconJeep's Avatar
Thread Starter
JK Enthusiast
 
Joined: Oct 2008
Posts: 409
Likes: 0
From: Raleigh,NC
Default





After having crushed my OEM steering stabilizer on my last outing, I've decided to upgrade as well as raise it out of the way to avoid it from happening again.



I went with the Teraflex steering stabilizer. I like it because it does the job well. I had it in my 09 JK. I also like that it's plain black and not some funky flashy colors that stick out like a sore thumb. I went with the Rubicon Express relocation bracket. I chose it because it was one of the few that didn't place it too high, which creates an undesirable angle. I kept the one on the steering for now, but will look for another that will place it more parallel.

"Ex Umbris Venimus"
Reply
Old Jul 2, 2017 | 11:50 PM
  #163  
ReconJeep's Avatar
Thread Starter
JK Enthusiast
 
Joined: Oct 2008
Posts: 409
Likes: 0
From: Raleigh,NC
Default

Due to Photobucket's **** up, this build thread will be dead till further notice. Sorry for the inconvenience.

"Ex Umbris Venimus"
Reply
Old Oct 1, 2017 | 01:19 PM
  #164  
ReconJeep's Avatar
Thread Starter
JK Enthusiast
 
Joined: Oct 2008
Posts: 409
Likes: 0
From: Raleigh,NC
Default



Just doing a test to see if the Photobucket BS is over and my images can be seen again. Please Let me know if this pic is showing. Would like to get back to continuing this thread.

"Ex Umbris Venimus"
Reply
Old Oct 5, 2017 | 04:44 AM
  #165  
GhostRHR's Avatar
JK Newbie
Veteran: Navy
 
Joined: Apr 2016
Posts: 88
Likes: 0
From: Virginia Beach, VA
Default

still seeing the same 3rd party hosting message.
Reply
Old Oct 5, 2017 | 05:23 AM
  #166  
ReconJeep's Avatar
Thread Starter
JK Enthusiast
 
Joined: Oct 2008
Posts: 409
Likes: 0
From: Raleigh,NC
Default

Originally Posted by GhostRHR
still seeing the same 3rd party hosting message.
Damn. :(

"Ex Umbris Venimus"
Reply
Old Oct 6, 2017 | 01:18 AM
  #167  
GhostRHR's Avatar
JK Newbie
Veteran: Navy
 
Joined: Apr 2016
Posts: 88
Likes: 0
From: Virginia Beach, VA
Default

Its ashame, definitely miss seeing your build one of my favorites for sure! I also am a big fan of the rescue group that you are a part of I would love to be involved with something like that!
Reply
Old Oct 11, 2017 | 06:55 AM
  #168  
ReconJeep's Avatar
Thread Starter
JK Enthusiast
 
Joined: Oct 2008
Posts: 409
Likes: 0
From: Raleigh,NC
Default



Testing another web image hosting. Please let me know if you can see this image. Thanks.
Reply
Old Oct 13, 2017 | 08:01 AM
  #169  
GhostRHR's Avatar
JK Newbie
Veteran: Navy
 
Joined: Apr 2016
Posts: 88
Likes: 0
From: Virginia Beach, VA
Default

yeah, can see it just fine! love the color matched flag decal!
Reply
Old Oct 13, 2017 | 08:24 AM
  #170  
ReconJeep's Avatar
Thread Starter
JK Enthusiast
 
Joined: Oct 2008
Posts: 409
Likes: 0
From: Raleigh,NC
Default

Originally Posted by GhostRHR
yeah, can see it just fine! love the color matched flag decal!
Awesome!!! Hope to get this build back on track. Thanks.

"Ex Umbris Venimus"
Reply


All times are GMT -8. The time now is 03:23 PM.