Bluesteeljk

I have a jk x with no fogs in the bumper. Instead of having fogs in the bumper like factory I was thinking of putting some 6" kc fogs on top of my factory bumper kind of like the tj. Have any of you guys done this and how does it look? Any pics would be most appreciated! Thank you!

Mark Doiron

There are several options here ...

http://www.quadratec.com/products/12001_920X_PG.htm

http://www.quadratec.com/products/12110_201.htm

http://www.quadratec.com/products/12110_2000_07.htm

http://www.quadratec.com/products/12110_1100_07.htm

http://www.quadratec.com/products/12010_5100.htm

http://www.quadratec.com/products/12010_900.htm

zking1776

I mounted KC Daylighter 130's on the piece between the frame-rails. Easy spot to get to for mounting and wiring and was able to keep them after getting rid of the stock bumper. I like them there a lot. I'll get some pics up soon.

20JK10

I know some people that bought the early version of the Mopar front bumper are using the Mopar accessory foglights on them, closest thing I could find to match your example.



The Mopar fogs are actually made by Hella and are a direct swap for the factory round ones. You can buy them at Quadratec.com or 4WD.com.

plroussel

See if this works.

08RedRecon

Probably the best example.

jckid

Stock bumper (with VDP stubby kit) and PIAA 520's:

RevyJKU08

How I mounted my Piaa fogs before I got my LoD middy. Procomp Bar bolted to stock bumper

[IMG][/IMG]

zking1776

Not the most ideal set up but it didn't cost a thing and only took a few minutes.

Daves11JK

This is the one I like, no mounting holes in bumper.