I want to put in an onboard air system and I'm considering installing a Viair, but was wondering where everybody is putting the tank. I would prefer to have it out of the way, but any suggestions would be great. Thanks

 

I’ve got mine mounted between the block and rad fan. ill grab some pics tomorrow. i also made a custom bracket out of aluminum to mount the two compressors above the tank.

 

VIAIR has come out with JK specific kits that are a direct bolt on and include everything you need, along with the wiring harness.

If you have a 07-11, there new 2on2 compressors system is ideal and outs our 4.55 CFM on the 150 PSI system. Also the ADA is a good unit if you are just looking to fill tires and operate air lockers, and not needing to run air tools.

We have a special running for May on both these kits. Just let me know if I could help you out or answer any questions.

May Special: VIAIR JK Specific Kits

 

Yep.... click that link above in my post and you will see it in there.

 

Ok I've got everything mounted but realized that the kit doesn't come with a hose to attach the tank to the manifold. I have been looking for a heat resistant hose but can't seem to find one anywhere. Any help would be great.

Thanks

 

look for a local tractor supply and they can make one to fit.

 

Great thanks

 

Which system did you end up with?

 

I got the Viair 2on2 with the JK mounts. I found an air hose at Hydraulic Supply for under the hood, and I love it works great!

 

Awesome system.