Finally! The Crush Rubi Unlimited is here!
My jeep finally made it to the dealership today! I was there as the car carrier pulled up. It has been a 2 month wait and I will take possession as soon as the AEV 3.5 lift, wheels, and 35s are on it (hopefully tomorrow).
Here is a pic right after they drove it off the car carrier. My daughter took it from her cell so the quality is so-so.
Attachment 227898
Here is a pic with the first mods. It is now officially mine (paid for and all). Time to update my profile. I will get some better pics tomorrow. The jeep is actually parked in my driveway angled up (daughter took the pick and "leveled it").
Attachment 228835
*done*
AEV 3.5 inch lift with bilstien shocks
Level 8 Strike 5 wheels, Falken Wildpeaks (315s)
**** bumpers and tire carrier
Homemade grab handles
Quadratec rubber floormats
Pinch seam and rock rail cut (need to fill and paint)
Flipped rear view mirror
Zip tied hood clamps
Teraflex exhaust spacers
*purchased but not yet installed*
Recon 10500 winch install
Wet Okole seat covers (fronts are on but not tightened)
Spiderweb shade install
Uniden PC78 cb install (not sure where to put it yet)
AFE exhaust crossover with wrap and silicon coating
*planned but not purchased*
axle sleeves and gussets
Grill inserts (will make my own screen for the radiator)
Here is a pic right after they drove it off the car carrier. My daughter took it from her cell so the quality is so-so.
Attachment 227898
Here is a pic with the first mods. It is now officially mine (paid for and all). Time to update my profile. I will get some better pics tomorrow. The jeep is actually parked in my driveway angled up (daughter took the pick and "leveled it").
Attachment 228835
*done*
AEV 3.5 inch lift with bilstien shocks
Level 8 Strike 5 wheels, Falken Wildpeaks (315s)
**** bumpers and tire carrier
Homemade grab handles
Quadratec rubber floormats
Pinch seam and rock rail cut (need to fill and paint)
Flipped rear view mirror
Zip tied hood clamps
Teraflex exhaust spacers
*purchased but not yet installed*
Recon 10500 winch install
Wet Okole seat covers (fronts are on but not tightened)
Spiderweb shade install
Uniden PC78 cb install (not sure where to put it yet)
AFE exhaust crossover with wrap and silicon coating
*planned but not purchased*
axle sleeves and gussets
Grill inserts (will make my own screen for the radiator)
Last edited by bgall; Oct 26, 2011 at 04:46 PM. Reason: updated pics
I give you props for putting the tires and lift on it already. I just can't seem to do it yet due to the warranty issues I know I will get here in California
. I could probably get away with 33's but that would be it. Post pics as soon as you can with the new set up..
. I could probably get away with 33's but that would be it. Post pics as soon as you can with the new set up..
The dealer is doing it. It is cheaper to pay for it via the vehicle purchase due to lower taxes (at least in AL it is). Jeep will still be covered by the dealer but extended warranty was not an option.
Off the truck and on the lift! i like the way you're doing this. Have you considered selling the parts back to the dealer or getting the money back out of them since they won't see any use? i have heard of a few cases of that happening.
Trending Topics
Originally Posted by jeepmojo
looks pretty high in the rear , quite a rake there ! in a good way !
i like the rake i know some do some dont but a slight rake looks good in my op ! best luck with it !
i like the rake i know some do some dont but a slight rake looks good in my op ! best luck with it !
Did the front get eibach lowering springs? :-) that color is siiiick. Just saw the one they dropped off at local dealer on Saturday. Was tempted to turn in and do a tradesy.
Love my Jk too much to give her back.
Love my Jk too much to give her back.



