Modified Stock Front Metal Bumper
Thread Starter
JK Newbie
Joined: Jul 2011
Posts: 4
Likes: 0
From: Choctaw, OK
I welded a plate into the factory holes and cut out a new hole for the factory fog lights. I made spacers to go inbetween the bumper and light brackets and screwed them down. Sorry for the late reply
Last edited by PowerDaemon; Aug 14, 2012 at 07:22 AM.
JK Enthusiast
Joined: Dec 2011
Posts: 262
Likes: 0
From: Wichita Kansas
Originally Posted by Delux2769
I modified mine the other night. I had to fabricate some Fog Light mounting plates.
I really like how it ended up.
I really like how it ended up.
JK Enthusiast
Joined: Sep 2011
Posts: 440
Likes: 1
From: Columbus, OH
JK Freak
Joined: Mar 2012
Posts: 571
Likes: 28
From: Moss Beach, CA
Nice job in the OP!
The only caution that I would voice is whether the bolts holding the brackets for the D-rings have enough tensile strength to handle the worst-case scenario. Would hate to see that thing flying through somebody's windshield.
The only caution that I would voice is whether the bolts holding the brackets for the D-rings have enough tensile strength to handle the worst-case scenario. Would hate to see that thing flying through somebody's windshield.