What was done to your JK this week?
Buy a sheet of decorative aluminum.
buy a small spool of SS wire.
Buy some wire tie anchors.
buy some epoxy.
Buy a few sheets of multi grit sandpaper.
Remove front grill.
Be careful removing the screws on top and the turn
-signals below.
Sand back side of grill around the whole grill area,
until the area feels rough and course.
Attach wire tie anchors to grill with epoxy.
pre-wire the anchors with 6 inches of SS wire.
Cut Decorative sheet to size of grill.
Place sheet onto back of grill, and pass SS wire through
the holes.
"Twist-tie" the SS wire, so decorative sheet is secure to back of grill.
Re-attach grill to front of Jeep.
Step back and be impressed by how great Your Jeep Looks Now.
Wonder why You didn't do that before.
Thank the JK-Forum Group for helping to increase the value of Your Jeep.
Have a Great Day Wheeling!!!
Originally Posted by afpilot82
Those look huge...why not make the top line up with the tub?
I haven't noticed any issues with flickering or otherwise. I'll have to further test when it gets darker. Its still pretty light out by the time I call it a night.
I have LED fever now though.
I have LED fever now though.
Picked her up from the dealer after having the left cylinder head replaced. Looked under the hood and found loose bolts a missing bracket and coolant laying in the bay. Promptly went back in and explained to the manager that if I ever gave back a customer vehicle like that iin the 6 years I worked as an ASE Master Tech, I would be fired on the spot! They fixed all my complaints and all seems well, but that really ticked me off.
Oh....and I performed the procedure to get rid of the seat belt chime
Oh....and I performed the procedure to get rid of the seat belt chime
Originally Posted by whyjay
Picked her up from the dealer after having the left cylinder head replaced. Looked under the hood and found loose bolts a missing bracket and coolant laying in the bay. Promptly went back in and explained to the manager that if I ever gave back a customer vehicle like that iin the 6 years I worked as an ASE Master Tech, I would be fired on the spot! They fixed all my complaints and all seems well, but that really ticked me off.
Oh....and I performed the procedure to get rid of the seat belt chime
Oh....and I performed the procedure to get rid of the seat belt chime





