What was done to your JK this week?
JK Newbie
Joined: Aug 2008
Posts: 2
Likes: 0
From: Hampton, Va
Today i ordered:
Rugged Ridge XHD Front Bumper (Stubby)
WARN M8000 Self-Recovery Winch
Rugged Ridge Xtreme Heavy Duty Rear Bumper
KC HiLiTES 6" Round SlimLite Series Long Range 130W (w/ window mounts)
Plus i'm thinking about rock rails ... Right now i'm up in the air. I can't find the one i really want which are these by MOPAR:
I've looked almost everywhere with no luck. If i can't find them or something very similar very soon i'm going to go with the regular MOPAR Enhanced Rock Rails. All i really need is something my son can climb up on (7yr old), functional and covers up that ugly seam.
Rugged Ridge XHD Front Bumper (Stubby)
WARN M8000 Self-Recovery Winch
Rugged Ridge Xtreme Heavy Duty Rear Bumper
KC HiLiTES 6" Round SlimLite Series Long Range 130W (w/ window mounts)
Plus i'm thinking about rock rails ... Right now i'm up in the air. I can't find the one i really want which are these by MOPAR:
I've looked almost everywhere with no luck. If i can't find them or something very similar very soon i'm going to go with the regular MOPAR Enhanced Rock Rails. All i really need is something my son can climb up on (7yr old), functional and covers up that ugly seam.
JK Freak
Joined: Aug 2007
Posts: 618
Likes: 0
From: Manassas, VA
JK Newbie
Joined: Sep 2008
Posts: 6
Likes: 0
From: Sydney, NSW
Well...... Let's see.....
It's in th shop this week, hopefully I'll get the call to pick it up today
but it's getting the following:
Rubi Express 3.5 super flex,
warn 9.5xp winch, and
a set of Mickey Thompson Baja MTZ 35's to replace the 33's I had.
Can't wait!!! I'll post a pic as soon as I get it.
It's in th shop this week, hopefully I'll get the call to pick it up today
but it's getting the following:Rubi Express 3.5 super flex,
warn 9.5xp winch, and
a set of Mickey Thompson Baja MTZ 35's to replace the 33's I had.
Can't wait!!! I'll post a pic as soon as I get it.
JK Freak
Joined: Jun 2008
Posts: 560
Likes: 0
From: LAUREL,DE
Wheels tires and good waxing
Put the wheels and tires on I bought from another forum member. Thanks wheelerbob. Hyper tech programer. Also clay barred and waxed.
Last edited by wayoflife; Jul 24, 2009 at 04:42 PM.
JK Freak
Joined: Oct 2007
Posts: 703
Likes: 0
From: Great Lakes
I have had them on for a few weeks now; and they are plenty bright. 9" H.I.D. from harbor freight and they seem to be holding up fine. I did have to do a couple of modifications to make everything right. The lights are too deep for the Mopar brackets, so I had to make some additional brackets to move them out slightly; I also painted the grilles with flat black bumper paint because the chrome grilles looked ridiculous. I also found the adjustments for the lights to be less than acceptable; this was cured by cutting some heater hose in half and placing the halves in the swivel mount’s, this cured the problem and made them very adjustable.
I am very pleased with the results; considering I only paid $70 a piece for the lights, and they appear to be knock off’s of the Delta Tech lights costing $600+ for a pair. Time will tell how well they hold up; but so far, so good…
This is a link to the Delta Tech; they sure look the same…
http://www.quadratec.com/products/97016_801.htm
I am very pleased with the results; considering I only paid $70 a piece for the lights, and they appear to be knock off’s of the Delta Tech lights costing $600+ for a pair. Time will tell how well they hold up; but so far, so good…
This is a link to the Delta Tech; they sure look the same…
http://www.quadratec.com/products/97016_801.htm
JK Super Freak
Joined: Dec 2007
Posts: 1,235
Likes: 0
Put the top and doors back on. Hannah is supposed to make her appearance tomorrow day/night.
Added tinted soft top windows. Looks great!
----------------
Now playing: Skinny Puppy - Dead Lines
via FoxyTunes
Added tinted soft top windows. Looks great!
----------------
Now playing: Skinny Puppy - Dead Lines
via FoxyTunes
JK Enthusiast
Joined: May 2008
Posts: 268
Likes: 0
From: Central Wisconsin
I have had them on for a few weeks now; and they are plenty bright. 9" H.I.D. from harbor freight and they seem to be holding up fine. I did have to do a couple of modifications to make everything right. The lights are too deep for the Mopar brackets, so I had to make some additional brackets to move them out slightly; I also painted the grilles with flat black bumper paint because the chrome grilles looked ridiculous. I also found the adjustments for the lights to be less than acceptable; this was cured by cutting some heater hose in half and placing the halves in the swivel mount’s, this cured the problem and made them very adjustable.
I am very pleased with the results; considering I only paid $70 a piece for the lights, and they appear to be knock off’s of the Delta Tech lights costing $600+ for a pair. Time will tell how well they hold up; but so far, so good…
This is a link to the Delta Tech; they sure look the same…
http://www.quadratec.com/products/97016_801.htm
I am very pleased with the results; considering I only paid $70 a piece for the lights, and they appear to be knock off’s of the Delta Tech lights costing $600+ for a pair. Time will tell how well they hold up; but so far, so good…
This is a link to the Delta Tech; they sure look the same…
http://www.quadratec.com/products/97016_801.htm
I think those would fit nicely on my bumper light bar...
