What was done to your JK this week?
JK Enthusiast
Joined: Jul 2008
Posts: 157
Likes: 1
From: Houston, TX
Added the Mopar fuel door and the Hidden Hitch wiring kit. As I was adding the wiring kit, I noticed that I had corked the hitch with mud so I started digging it out. There was a lot more than I expected!
Fuel door:
And the mud cork:
Fuel door:
And the mud cork:
JK Enthusiast
Joined: Aug 2008
Posts: 282
Likes: 0
From: Goddard, KS
Put on the JK & Midwest decals today
It got up to almost 60 degrees in Wichita today - it was as good a time as any to get the "X" decal removed and put in place the new JK and Midwest decals.
Thought I'd post a few pics of the end result....
Thought I'd post a few pics of the end result....
JK Junkie
Joined: Nov 2008
Posts: 2,498
Likes: 5
From: Long Island, NY
Well, I just got mine and did the following:
- Mopar Steel Bumper upon arrival to dealership
- ALLGIG (installed 60 minutes after ownership) with mic
- Removed Decals: "Wrangler" "Unlimited"
- Removed: Trail Rated (felt it was redundant!)
- Waxed it while watching a movie on MYGIG
(went to bed at 1am)
- Installed Mag Light to seat side
- Installed Fire Extinguisher
- Installed cargo net from KJ
- Drilled outside mirrors
- Warn shackle in receiver
- Tinted front windows
- Installed garage door opener in A pilar
- Installed rear grab handles (from Project KJ forum write up - VERY NICE MOD!)
- Test fitted Thule racks
- Removed roof panels, roof, and convertible top (during snow storm)
- Drove in back yard in snow testing lockers and 4:1 transfer case!
Ran back inside and posted pics!
Pics:
I'll have to post pics of the A pillar mod.
- Mopar Steel Bumper upon arrival to dealership
- ALLGIG (installed 60 minutes after ownership) with mic
- Removed Decals: "Wrangler" "Unlimited"
- Removed: Trail Rated (felt it was redundant!)
- Waxed it while watching a movie on MYGIG
(went to bed at 1am)
- Installed Mag Light to seat side
- Installed Fire Extinguisher
- Installed cargo net from KJ
- Drilled outside mirrors
- Warn shackle in receiver
- Tinted front windows
- Installed garage door opener in A pilar
- Installed rear grab handles (from Project KJ forum write up - VERY NICE MOD!)
- Test fitted Thule racks
- Removed roof panels, roof, and convertible top (during snow storm)
- Drove in back yard in snow testing lockers and 4:1 transfer case!
Ran back inside and posted pics!
Pics:
I'll have to post pics of the A pillar mod.
Last edited by adamisadam; Dec 8, 2008 at 07:02 AM.
JK Enthusiast
Joined: Jul 2007
Posts: 325
Likes: 0
From: New Iberia, LA
You know I would not even put a decal on my JK like that because of damage that could occur. Do you know what I mean?
What I did today? Removed a perfectly good Rough Country 2.5" progressive spring lift with the 2.2 shocks and installed a Rough Country 2.5" budget boost with shock extenders. Some peoples children.
What I did today? Removed a perfectly good Rough Country 2.5" progressive spring lift with the 2.2 shocks and installed a Rough Country 2.5" budget boost with shock extenders. Some peoples children.
Last edited by mgaspard; Dec 7, 2008 at 06:11 PM.
JK Enthusiast
Joined: Jun 2008
Posts: 199
Likes: 1
From: Cleveland, TN
Made a grille insert kit using stamped aluminum with a hexagonal honey comb pattern:
If you are interested in doing this yourself, I added a write-up for it
:
https://www.jk-forum.com/forums/jk-write-ups-39/grille-mesh-insert-new-method-64142/
If you are interested in doing this yourself, I added a write-up for it
:https://www.jk-forum.com/forums/jk-write-ups-39/grille-mesh-insert-new-method-64142/
JK Enthusiast
Joined: Aug 2008
Posts: 323
Likes: 0
From: Anaheim Ca
Made a grille insert kit using stamped aluminum with a hexagonal honey comb pattern:
If you are interested in doing this yourself, I added a write-up for it:
https://www.jk-forum.com/forums/showthread.php?t=64142
If you are interested in doing this yourself, I added a write-up for it
:https://www.jk-forum.com/forums/showthread.php?t=64142
. Best home made grill insert I've seen.