What was done to your JK this week?
Removed the sheet metal with the three holes from the upper portion of the stinger from my smittybilt stinger bumper
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445721"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445723"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445721"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445723"/>
Here is a before of the front
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445522"/>
Side shot of the originals
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445524"/>
Passenger side up, can see the differences in the new flare and the old one
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445524"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445525"/>
Close up
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445526"/>
Side shot
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445527"/>
Front with both on
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445528"/>
Driver side going up
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445529"/>
Shot from the back of the driver side flare
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445530"/>
Just need to attach the inner fender and all finished
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445531"/>
All finished up!
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445521"/>
Now to tackle the rear fenders!
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445522"/>
Side shot of the originals
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445524"/>
Passenger side up, can see the differences in the new flare and the old one
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445524"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445525"/>
Close up
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445526"/>
Side shot
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445527"/>
Front with both on
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445528"/>
Driver side going up
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445529"/>
Shot from the back of the driver side flare
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445530"/>
Just need to attach the inner fender and all finished
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445531"/>
All finished up!
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=445521"/>
Now to tackle the rear fenders!
JK Freak
Join Date: Dec 2012
Location: plant city FL
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
JK Enthusiast
Join Date: Apr 2010
Location: Manitou Springs, CO
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
Wasn't too bad at all. I had to drill two new holes in the bracket as it wasn't designed for the compressor I have. Also when putting in the bracket, it gets really tight in there and rachetting wrenches will help a LOT.
JK Enthusiast
Join Date: Apr 2012
Location: Visalia, CA
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts