What was done to your JK this week?
JK Newbie
Joined: Jun 2014
Posts: 3
Likes: 0
From: Mississippi
Rear cargo LEDs and more
I wanted light in the cargo area and back outside of jeep when camping so I wired 4 LEDs, 2 on the roll bar and 2 on the back glass to my a pillar switch panel. The 2 on the glass have a disconnect for top removal. Also added LED rock lights and a 20 inch light bar. 
JK Newbie
Joined: Nov 2013
Posts: 52
Likes: 0
I wanted light in the cargo area and back outside of jeep when camping so I wired 4 LEDs, 2 on the roll bar and 2 on the back glass to my a pillar switch panel. The 2 on the glass have a disconnect for top removal. Also added LED rock lights and a 20 inch light bar. <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=591739"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=591739"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=591740"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=591741"/>
Sent from my iPad using JK-Forum
JK Super Freak
Joined: Sep 2013
Posts: 1,636
Likes: 7
From: Mentor, OH
JK Enthusiast
Joined: Sep 2012
Posts: 467
Likes: 1
From: Ohio
I can vouge for eBay bought stuff. I purchased eBay 50" light bar brackets and not 20 seconds after I mounted my light for specs I take it off and the powder coat is gone. I soul recommend stripping down the coat that they put on and either go with: a) the cheaper route and get plasti dip and do the whole bumper with it. B) the still cheap yet more expensive that plasti dip and rhino line, raptor line so on. C) get a shop to do a custom powder coating that is a lot better than the eBay type.