What was done to your JK this week?
JK Freak
Joined: Jul 2010
Posts: 779
Likes: 0
From: Montreal
JK Enthusiast
Joined: Mar 2013
Posts: 198
Likes: 0
From: San Diego, CA
JK Enthusiast
Joined: Mar 2013
Posts: 198
Likes: 0
From: San Diego, CA
JK Newbie
Joined: Jan 2015
Posts: 20
Likes: 0
From: Port Chester, NY
I'll be honest with you I bought it from a friend of mine so I don't know exact numbers to give u but those are the stock fog lights I built a custom bracket to mount them in there...it's an ORC bumper idk if they have other kinds without the bar
JK Newbie
Joined: Jul 2011
Posts: 26
Likes: 0
From: Gilbert, AZ
Griffin Extreme Cool
Wired in with OEM sending unit and voltage divider.
The twin Spals pull a shit ton of hot air out, when compared to the factory 16".
First run out with with them yesterday and even helped to keep the PSC tranny and power steering cooler temps lower as well.
Wired in with OEM sending unit and voltage divider.
The twin Spals pull a shit ton of hot air out, when compared to the factory 16".
First run out with with them yesterday and even helped to keep the PSC tranny and power steering cooler temps lower as well.
JK Freak
Joined: Jul 2010
Posts: 779
Likes: 0
From: Montreal
JK Enthusiast
Joined: Mar 2013
Posts: 198
Likes: 0
From: San Diego, CA
The HIDs were 35w Hi-Lo .. The Hi never worked because of a flicker. I was told that I still needed to install some other anti-flicker kit which I never did .. I believe one of the ballasts blew out as the one light that wouldn't work would click on for a second and then off .. overall, they were much brighter than the stock but as mentioned by other posters here, the pattern wasn't ideal as they housings weren't really designed for HIDs. But still better regardless of what people say ..
I drove around with the KCs on last night.. Much better than the HID set up and the fact that they were basically plug and play is a huge plus and while I really only have experience for one night, I still wish I had gone this route originally.
I'll try and get some night time shots over the next couple of days ..
I drove around with the KCs on last night.. Much better than the HID set up and the fact that they were basically plug and play is a huge plus and while I really only have experience for one night, I still wish I had gone this route originally.
I'll try and get some night time shots over the next couple of days ..
JK Newbie
Joined: Nov 2014
Posts: 64
Likes: 0
From: Lampasas, TX
Installed a winch rocker switch in the A-Pillar. My winch isn't wireless remote capable and I don't like running the remote through the window. $18 for the switch on eBay and a few hours to wire it up. The bulk of which was heat shrinking all the wiring.