Built this over the Thanksgiving week holiday with my old man and two boys. It's my version of a JKU Rubi rear storage system for overlanding. And my make shift ARB Freezer. Still need to add the flip paddle locks and wrap it up with subwoofer cloth in black. Lol hope you all like.

 

Started with a smooth/painted top that replaced my old textured finished top. Because of that - it was easy. If it would have required sanding down the textured finish, I never would have done it.

Before photo -

 

Bought the jeep 1.5 weeks ago.

Today = new LED headlights

 

This weekend I installed a Roof Rack on my spare hard top.

Bought the roof rails off of a 95' Pathfinder - Cut and painted to suit
Purchased the cross bars from 80/20

I will be duplicating this set up on my main hard top.


Let me know what you think!

 

Went wheeling to hot springs ORV Park (Superlift).

 

let's go rangers!!!!!

 

Replaced my front driveshaft.

 

I recently had mine replaced too. Do you have a double cardan joint at the transfer case? I do and the shaft isn't inline with the front diff pinion, similar to yours. I have a vibration at about 70 mph and think that might be the problem. Do you have a vibration?

 

The angle on my drive shaft looks like that because it's on a lift. It's an Adams drive shaft, 36 inch, and I have a rock Krawler 2.5 inch lift.

I did get the jeep up near 70mph today, and possibly over that, but did not have any vibration.

If your lift included control arms, then make sure they are adjusted correctly, if your pinion angle is off that can cause drive shaft issues.

My new drive shaft is much quieter, since my CV boot was blown on the stock one and there was no oil left.

 

I have an Adams too. My lift didn't include adjustable control arms, so that's something I'll be looking into.