What was done to your JK this week?
Guest
Posts: n/a
i havent done anything to it, but my CC is getting modded. ive ordered
ome 2" lift
bfg km2 315/75/16
and some wheels are going to get ordered but i cant decide on anything!!!
Thats my start...
i cant wait until late next week when everything is in.
happy modding!
ome 2" lift
bfg km2 315/75/16
and some wheels are going to get ordered but i cant decide on anything!!!
Thats my start...
i cant wait until late next week when everything is in.
happy modding!
JK Junkie
Joined: Jan 2008
Posts: 2,319
Likes: 0
From: Long Island, NY
Installed my factory cruise control.
Installed my factory tow hooks.
Hardwired my XM radio and tucked the wiring.
Built in my Cobra CB.
Firestik 4' antenna with TeraFlex mount.
Installed Rugged Ridge seat vests.
JK Super Freak
Joined: Aug 2007
Posts: 1,315
Likes: 1
From: Texas
Relocated my passenger side seat-belt for easier access. 07 2dr
Zip tied my hood latches because of hood lift. Finally fixed the lift!!!!!!
I mean the hood stayed down 100% Just make sure you have the hood latched before you pull them tight.
I had to put two ties together to make them long enough. I put extras in the Jeep just because. They really don't seem to have much pressure on them- just tight. Only noticeable to another Jeep person if they were looking for it. This WORKS!!!!!!!
Zip tied my hood latches because of hood lift. Finally fixed the lift!!!!!!
I mean the hood stayed down 100% Just make sure you have the hood latched before you pull them tight.
I had to put two ties together to make them long enough. I put extras in the Jeep just because. They really don't seem to have much pressure on them- just tight. Only noticeable to another Jeep person if they were looking for it. This WORKS!!!!!!!
Last edited by Geeper4x4; Feb 25, 2008 at 07:14 PM.
JK Freak
Joined: Nov 2006
Posts: 688
Likes: 0
....................
JK Freak
Joined: Nov 2006
Posts: 805
Likes: 0
From: Albuquerque, NM
Relocated my passenger side seat-belt for easier access. 07 2dr
Zip tied my hood latches because of hood lift. Finally fixed the lift!!!!!!
I mean the hood stayed down 100% Just make sure you have the hood latched before you pull them tight.
I had to put two ties together to make them long enough. I put extras in the Jeep just because. They really don't seem to have much pressure on them- just tight. Only noticeable to another Jeep person if they were looking for it. This WORKS!!!!!!!
Zip tied my hood latches because of hood lift. Finally fixed the lift!!!!!!
I mean the hood stayed down 100% Just make sure you have the hood latched before you pull them tight.
I had to put two ties together to make them long enough. I put extras in the Jeep just because. They really don't seem to have much pressure on them- just tight. Only noticeable to another Jeep person if they were looking for it. This WORKS!!!!!!!
JK Freak
Joined: Oct 2007
Posts: 944
Likes: 0
From: Edinburg, TX
Did a couple of things this past week, got my JKS quicker disconnects, installed them, also got my shortie antenna, which is awesome, the old one was eye sore. Today bought some organizing folios, one for the jeep and one for all my school crap, im a college student and this is the first I been so organized and cleaned, threw all my books and supplies into my Jeep Duffel bag. My versamount came in today, and tomorrow I pickup my lockpick, so tomorrow afternoon im planning a lockpick, cellphone mount, and airhorn install. Time to sleep, tomorrow im skipping my chem class to have my amp flashed, shhh dont tell 
JK Enthusiast
Joined: Apr 2007
Posts: 189
Likes: 0
From: Italy
Couple of hours each layer.
Description and pics here:
https://www.jk-forum.com/forums/jk-write-ups-39/herculining-gotchas-jk-unlimited-pics-30057/
Description and pics here:
https://www.jk-forum.com/forums/jk-write-ups-39/herculining-gotchas-jk-unlimited-pics-30057/
JK Super Freak
Joined: Aug 2007
Posts: 1,315
Likes: 1
From: Texas
I attached it to the bolt that holds the seat. It is much larger and stronger. I must tell you though that bolt is really really tight. I had to use a cheater bar and a lot of muscle to break it lose. This write up is in the write up section under "Sound the Trumpets". I will look for the link.
https://www.jk-forum.com/forums/jk-write-ups-39/sound-trumpets-07-2-door-back-seat-entry-problem-solved-28591/
https://www.jk-forum.com/forums/jk-write-ups-39/sound-trumpets-07-2-door-back-seat-entry-problem-solved-28591/
Last edited by Geeper4x4; Feb 26, 2008 at 03:58 AM.
JK Super Freak
Joined: Dec 2007
Posts: 1,750
Likes: 1
From: WV relocated 2 Dyess AFB, TX
2.5" Tera Flex using the Nitro Rubicon shocks.
1.5" Spidertrax Spacers
NOTE: I left out the rear stock rubber spring isolators (spacers) to level it out a bit. They measured at a bout 1/2" and they were really soft so probably compressed some too. I am happy to report that the ride is still the same and did not have any adverse affect on the suspension.
Before
After
1.5" Spidertrax Spacers
NOTE: I left out the rear stock rubber spring isolators (spacers) to level it out a bit. They measured at a bout 1/2" and they were really soft so probably compressed some too. I am happy to report that the ride is still the same and did not have any adverse affect on the suspension.
Before
After