What was done to your JK this week?
this is a great idea, I think it almost needs it's own category. It is making me very very jealous. But unfortunately for me recently the order I put in for a silver 4 door got cancelled by the dealer after I put a sizable deposit down and negotiated a price. He called to say to come and pick my deposit up and if I wanted to buy the car off him in future I would have to pay full price, information that would have been useful back in march when i put the order in.. Fortunately there is a jeep dealer on the gold coast that has looked after me, a true professional. Jeep in aust are super tight about stock levels ,I can't wait to get it though. Unfortunately I am stuck driving round in a monaro ( i think you call them pontiac gto's over there)
5/25 Installed TUFFY security trunk
5/26 Installed TUFFY security console
5/28 Installed the grill mod
Previously:
Dealer installed leather seats with pneumatic lumbar support and seat heat
GENTEX autodim mirror with outside temp, compass, map lights
AEM Cold Air Intake
CIBIE headlights w city light, OSRAM 70/65 watt bulbs
TRIKOR Tire Pressure Monitor
THULE hardtop rack
COOL TECH antenna mount
Quickmount receiver rack & cargo bag
5/26 Installed TUFFY security console
5/28 Installed the grill mod
Previously:
Dealer installed leather seats with pneumatic lumbar support and seat heat
GENTEX autodim mirror with outside temp, compass, map lights
AEM Cold Air Intake
CIBIE headlights w city light, OSRAM 70/65 watt bulbs
TRIKOR Tire Pressure Monitor
THULE hardtop rack
COOL TECH antenna mount
Quickmount receiver rack & cargo bag
5/25 Installed TUFFY security trunk
5/26 Installed TUFFY security console
5/28 Installed the grill mod
Previously:
Dealer installed leather seats with pneumatic lumbar support and seat heat
GENTEX autodim mirror with outside temp, compass, map lights
AEM Cold Air Intake
CIBIE headlights w city light, OSRAM 70/65 watt bulbs
TRIKOR Tire Pressure Monitor
THULE hardtop rack
COOL TECH antenna mount
Quickmount receiver rack & cargo bag
5/26 Installed TUFFY security console
5/28 Installed the grill mod
Previously:
Dealer installed leather seats with pneumatic lumbar support and seat heat
GENTEX autodim mirror with outside temp, compass, map lights
AEM Cold Air Intake
CIBIE headlights w city light, OSRAM 70/65 watt bulbs
TRIKOR Tire Pressure Monitor
THULE hardtop rack
COOL TECH antenna mount
Quickmount receiver rack & cargo bag
Tuffy console:

Tuffy Trunk (security drawer):


Grill mod:
Sorry about the black on black picture. Its really hard to photograph using the camera flash. Its raining and overcast whicjh usually results in a better picture, nut not this time. I'll have to try later with my external flash and see if I can't get better contrast. The gutter guard is painted with gloss black plasti spray. It looks much better in person, and will look even better after I ge the bugs washed off the grill

Antenna mount & fuel filler door:


Tire Pressure monitor:


THULE roof rack:

Leather Seats & controls:


Tuffy Trunk (security drawer):


Grill mod:
Sorry about the black on black picture. Its really hard to photograph using the camera flash. Its raining and overcast whicjh usually results in a better picture, nut not this time. I'll have to try later with my external flash and see if I can't get better contrast. The gutter guard is painted with gloss black plasti spray. It looks much better in person, and will look even better after I ge the bugs washed off the grill


Antenna mount & fuel filler door:


Tire Pressure monitor:


THULE roof rack:

Leather Seats & controls:

finally installed the Airaid throttle body spacer and CAI... and as for the whistle, nowhere near as annoying as I was expecting (due to the amount of conversation on this forum)... nice little whistle (much like a turbo) immediately and on the lower end and then a nice growl under higher rpm's... I also had time to install the highrock oversized tire carrier, however, I noticed that the spare will rattle and make a little noise over bumps... I've tightened the t-handle as tight as possible, however, there is still some slop in there... may need to fab a filler piece to fit the center hole of the spare & make it seat a little tighter.... Pics coming soon.... Oh yeah, if I have some time after the bar-b-q later this afternoon, I may get around to installing my cooltech llc exhaust system...
Here's what I got done:


Dual extinguishers on the roll cage. Also installed a small one on the driver's side floor. Guess I'm mostly prepared for a fire...
'Cept these two need to get recharged.
Also spent quite a bit of time trying to install factory tow hooks. Decided it wasn't worth the time, frustration and hacking at plastic... Going to replace the bumper anyway, just sooner than I'd planned.


Dual extinguishers on the roll cage. Also installed a small one on the driver's side floor. Guess I'm mostly prepared for a fire...
'Cept these two need to get recharged.Also spent quite a bit of time trying to install factory tow hooks. Decided it wasn't worth the time, frustration and hacking at plastic... Going to replace the bumper anyway, just sooner than I'd planned.


