What is Your Cheapest Jeep Upgrade?
02-25-2011, 07:27 PM
#22
JK Junkie
Join Date: Aug 2007
Location: Gilbert, AZ
Posts: 2,944
Likes: 0
Received 0 Likes
on
0 Posts
Yes lightly with a fine sanding pad/block. There are a bunch of write ups on wheel painting on here. Taping off the wheels was the most time consuming part. I liked the color and light texture of the hammered black paint. Kinda came out charcoal gray. I painted some old trailer wheels first to see how it looked.
02-25-2011, 08:08 PM
#23
JK Newbie
Join Date: Aug 2010
Location: Bettendorf, IA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Bought a tray for the top of the center of my dash.
Bought a Chrysler microphone to enable the handsfree phone (then realized that the wind noise makes it nearly impossible for the other person to hear me).
Made a mount for my trailer brake controller on top of the dash (above the instrument cluster).
Made some real arm rests for those doors.
Made a soft vinyl slip-on cover for the center console.
Made a set of four "oh shoot" handles.
Drilled out and replaced those fake screws around the stick shift boot with real screws.
Bought a better set of hood hold-downs that have stopped the hood "flutter."
Bought a monthly plan (unlimited washes) at on of the local full-service car washes.
Cleaned out half of the garage so I can park inside (for the first winter in seven years).
Bought a Chrysler microphone to enable the handsfree phone (then realized that the wind noise makes it nearly impossible for the other person to hear me).
Made a mount for my trailer brake controller on top of the dash (above the instrument cluster).
Made some real arm rests for those doors.
Made a soft vinyl slip-on cover for the center console.
Made a set of four "oh shoot" handles.
Drilled out and replaced those fake screws around the stick shift boot with real screws.
Bought a better set of hood hold-downs that have stopped the hood "flutter."
Bought a monthly plan (unlimited washes) at on of the local full-service car washes.
Cleaned out half of the garage so I can park inside (for the first winter in seven years).
Last edited by derricklaukaitis; 02-25-2011 at 08:18 PM.
02-26-2011, 07:19 AM
#25
Super Moderator
I'm not sure if this falls under the "cheap" category....but I feel the Rugged Ridge soft top boot was a very worth while mod for me. $50.
I usually keep my soft top on and put the hard top on over it in the winter. The boot helps protect it when I'm sliding things in and out of the rear. (kind of like condom, now that I worded it like that)
When I'm riding with the soft top in the summer, it keeps the soft top from flapping around and protects the inside white material protected from dirt and such.
I usually keep my soft top on and put the hard top on over it in the winter. The boot helps protect it when I'm sliding things in and out of the rear. (kind of like condom, now that I worded it like that)
When I'm riding with the soft top in the summer, it keeps the soft top from flapping around and protects the inside white material protected from dirt and such.
02-26-2011, 07:28 AM
#26
JK Enthusiast
Join Date: Oct 2009
Location: Kansas City home-town/ in Germany right now
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Headliner For 50$
Here is my mod I did today! Alot better then $200+ for those kits.
link below
https://www.jk-forum.com/forums/show...-headliner..50
link below
https://www.jk-forum.com/forums/show...-headliner..50
02-28-2011, 12:05 PM
#29
JK Freak
Join Date: Apr 2010
Location: Northern, TN
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Few items
Velcro'ed a small flashlight to the roll bar. ($2.00)
Rear Cargo liner a piece of an old rubber bed mat. (Free from a previous truck and then I got it on clearance for $25 bucks)
Raised Floor Mats to keep water and slush from getting on the factory mats ($20 bucks)
Rear Cargo liner a piece of an old rubber bed mat. (Free from a previous truck and then I got it on clearance for $25 bucks)
Raised Floor Mats to keep water and slush from getting on the factory mats ($20 bucks)
