Advance Adapters really came through on this, thanks alot guys. I am really looking forward to permanently solving this linkage problem, as well as showing the rest of the members how the install goes. PM with shipping info sent

 

That video is awesome. Something I am going to consider, I had the linkage clips break twice, once in the center console and the second time on the t-case.

 

I have 105,000km on my 2007 unlimited, havn't had a problem yet. When I do I'll get their cable. I had AA Rubicrawler #10 installed at around 65,000km and have to say its the single best improvement I've done on my Jeep. I highly recomend their products.

 

Pm sent to advance adapters!

I can't even begin to describe how much of a blessing this is!

 

Congrats! I saw this cable the other day and am interested in a possible upgrade since I've experienced such failure on the trail. My only concern is the $180 when factory bushings are less then a buck. Someone sell me on this since I'm not one of you lucky three who are the new sales team for advance adaptors.

 

Congrats guys! Can't wait to read the write up and see the install pics!

 

I got the cable a couple months ago, and it has been just sitting in the box on a shelf in my garage. From what I can tell....it is stout....Hopefully Ill get it put in... Where is the video you guys are talking about?

 

I've used advance adapters products before when I installed a 350 with turbo 350 trans into my 90 wrangler. For simplicity sake, I kept the jeep's t-case and driveshafts and used advance's motor mount and adapter kit. All worked very well. There was some confusion on a tranny mount, but it's been so many years since that thing was built, I don't remember what was going on there. That jeep is still running with the adapters and it's been 11 years since the install!!

Congrats to the instant winners! And bravo to Advance for chooosing to do some impromptu advertising!! Word of mouth(or word of forum) can really sell products!!

 

Video is below...

http://www.advanceadapters.com/products/pn-715596/

 

I'd volunteer to do a TJ shifter write-up!!
I was just looking at this last night. I just helped a buddy adjust his shifter tnite. Not a fan of the stock shifter.