aev cornerguards?? holes?
Thread Starter
JK Freak
Joined: Dec 2006
Posts: 923
Likes: 1
From: Jim Thorpe, Pa
aev cornerguards?? holes?
I was just looking at the ad on the back cover of JP(may08) magazine and they have the AEV corner guards pictured,, but they have NO license plate holes??
Are these available?? I thought not ,, or were they just for the picture??
These,,
Are these available?? I thought not ,, or were they just for the picture??
These,,
Last edited by Cruiser; Apr 22, 2008 at 05:59 PM.
JK Enthusiast
Joined: Mar 2008
Posts: 334
Likes: 0
From: Seattle
Here is a link for the 4 door version
http://www.northridge4x4.com/proddet...AEV-10303014AA
It shows holes for the plate.
http://www.northridge4x4.com/proddet...AEV-10303014AA
It shows holes for the plate.
JK Enthusiast
Joined: May 2007
Posts: 237
Likes: 1
From: Saint Paul, MN
Contact Dave at Northridge, or try AEV directly. I remember there being a thread about this before, but for the life of me I can't find it. I am pretty sure you can get those without license plate holes though. Would be pretty odd of AEV didn't offer them without the holes, considering that most of the foreign JK's don't even have that license plate mount anyways.
You could always just get the plug for the holes too.
You could always just get the plug for the holes too.
Eternal ***erator
Joined: Oct 2006
Posts: 18,270
Likes: 3
From: Niagara, New York
I contacted AEV directly about these in August of '07. This is the response i received at that time:
that would have been around christmas time.
I STILL have not seen them.
I just re-sent the inquiry. We'll see which year they say this time.
"At this time we do not offer the corner guards without the license
plate holes. It is, however, on our list of products to offer and we will
more than likely be selling them near the end of this year.
Thanks, john
John Natoci"
plate holes. It is, however, on our list of products to offer and we will
more than likely be selling them near the end of this year.
Thanks, john
John Natoci"
I STILL have not seen them.
I just re-sent the inquiry. We'll see which year they say this time.
Last edited by HappyCurmudgeon; Apr 23, 2008 at 06:45 AM.
Eternal ***erator
Joined: Oct 2006
Posts: 18,270
Likes: 3
From: Niagara, New York
Just received this back from AEV:
Well, so much for AEV, maybe somebody else will step up and make some.
We have not pursued any other design iterations for the corner guards and do not plan to do so in the near future. I apologize we can't accomodate your needs at this time. Thanks, John
Well, so much for AEV, maybe somebody else will step up and make some.
Trending Topics
That would be the easiest thing.
Eternal ***erator
Joined: Oct 2006
Posts: 18,270
Likes: 3
From: Niagara, New York
because.... I dont wanna?
I dont have a welder. If i did, then i would need to repaint them anyhow? I was hoping to avoid having to do that by just getting them the way i wanted in the first place.
I dont have a welder. If i did, then i would need to repaint them anyhow? I was hoping to avoid having to do that by just getting them the way i wanted in the first place.
