Axle off center question...
JK Freak
Joined: Jul 2007
Posts: 681
Likes: 0
From: eastern north carolina
[QUOTE=ag2000;668259]anybody know where an online instruction is for this. One that would show pictures of where these brackets go so they get it right this time? I have looked around but don't really know what I am looking at.[/QUO
search track bar bracket,there is a great a pic in there from az jk, the search function is in the upper right hand corner it should pull up plenty of hits well talked subject. you need to remove the bracket you have up front and put the track bar into the stock location. you can run without your rear track bar bracket i have done so for 20+ thousand miles. also make sure they put the sway bar links on the inside of the rear sway bar. good luck, the front track bar bolt needs to be torqued at 125ft lbs. have fun wrenching WOL also did a great write up on the 2.5bb
search track bar bracket,there is a great a pic in there from az jk, the search function is in the upper right hand corner it should pull up plenty of hits well talked subject. you need to remove the bracket you have up front and put the track bar into the stock location. you can run without your rear track bar bracket i have done so for 20+ thousand miles. also make sure they put the sway bar links on the inside of the rear sway bar. good luck, the front track bar bolt needs to be torqued at 125ft lbs. have fun wrenching WOL also did a great write up on the 2.5bb
Last edited by bahadden; Sep 3, 2008 at 09:05 AM.
Thread Starter
JK Newbie
Joined: Jul 2008
Posts: 17
Likes: 0
From: Round Rock, TX
So they are sending a tow truck right now to pick her up...The bracket that they put in the front is the new rear track bar bracket correct? I don't need to buy one seperately? I think I am reading that right.
JK Enthusiast
Joined: Apr 2008
Posts: 166
Likes: 0
From: Raeford, NC
www.teraflex.biz 
They have the instructions online. 
Can't beat a company like this. Also maybe you could go to the sponser/manufactureer page and put a shout out to Joe at Teraflex. Or even better yet, send him a message, j.thompson@teraflx.com This ought to take care of ya.
They have the instructions online. Can't beat a company like this. Also maybe you could go to the sponser/manufactureer page and put a shout out to Joe at Teraflex. Or even better yet, send him a message, j.thompson@teraflx.com This ought to take care of ya.
Last edited by Hellbilly; Sep 3, 2008 at 09:38 AM.
JK Freak
Joined: Jul 2007
Posts: 681
Likes: 0
From: eastern north carolina
[IMG][URL=http://imageshack.us]
[/[/IMG]
Thread Starter
JK Newbie
Joined: Jul 2008
Posts: 17
Likes: 0
From: Round Rock, TX
They just towed her away...Thanks for all the help everyone. I sent them some pictures from other threads to clarify what they are supposed to do. Maybe I should just pay ya'll.........
JK Enthusiast
Joined: Apr 2007
Posts: 359
Likes: 0
From: Manassas, VA
Please keep us posted and let us know when your Jeep is back in your happy hands....Sucks the dealership just sorta threw it on there without reading anything let alone look at pictures..shessh...
Thread Starter
JK Newbie
Joined: Jul 2008
Posts: 17
Likes: 0
From: Round Rock, TX
They just called and said its ready. They are going to drive it one more time and make sure the alignment is good. He said the guy who put it on thought it went in the back but it wouldn't fit and it fit perfect in the front so he just left it on there.
They did screw it up but they did me right and where apologetic and got every fixed...I hope. They said they took a picture and blew it up real big and hung it in the office. I thought that was cool.
They did screw it up but they did me right and where apologetic and got every fixed...I hope. They said they took a picture and blew it up real big and hung it in the office. I thought that was cool.