John, I have the bumpstop extension from my Full Traction 2" BB that I just removed. If you will pay shipping, you are welcome to them. The rear ones bolt right to the stock location in the rear, but the fronts require you to drill a small hole for a self threading bolt in the center of each front spring pad. NOthin to it really. Let me know and they are yours.

 

Thanks redneck but I think I need 4" BS's at full stuff there is about 2" left betwwen the stock BS and axle so I think I need 4"

 

Yeah....I think the blocks I have are around the 2" mark.....so they are probably too short. The thought was there.. Dammit all. I wish they wouldda been what you needed.

 

I have rears that I made if you could measure your front blocks I would be interested

 

For a comparrison, here are pics at full compression with and without the 2" bumpstop. I could be wrong, but I don't 'think' I need the uppers, and will just trim the fender.

With no bumpstop extension:



With 2" lower bumpstop:

 

yeah that first pic is exactly how mine looked.... so maybe a 2" BS will work

 

I will flex again this weekend and measure to see if the 2" ones will work then I may be taking you up on your offer there redneck

 

That will be fine. Just let me know. I measured them and they are exactly 2".