Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

fender

Thread Tools
 
Old Feb 18, 2010 | 01:32 AM
  #1  
Nytro-JK's Avatar
Thread Starter
JK Newbie
 
Joined: Jan 2009
Posts: 8
Likes: 0
From: Italy
Default fender

Hi everyone!

i'm a new member but i bought a JK rubicon 2 doors 2 years ago,
after 22.000 miles i have to change fenders,

in italy the tires must be covered to be street legal;
i have 35"x12.5 tires on Procomp rims with 4.75 backspace and 1,25 wheel spacers.

now i whear flexy flares atached on OEM fender to cover my tires.

now,
i'd like to buy flat fenders like xenon or new bushwacker.

have i problem without spacers? i have a 3,5"lift kit.


someone can post a front picture of his JK ith xenon or bushwacker to see tire coverage?

tank's for your patience.

(sorry for my english!!!!!!)

NytroJK (italy)
Reply
Old Feb 18, 2010 | 04:36 AM
  #2  
joneszj's Avatar
JK Super Freak
 
Joined: Nov 2008
Posts: 1,090
Likes: 0
From: East Coast
Default

You will be fine without any spacers. I personally don't have either of these flat fenders, but you should be fine so long as you order the Xenon Wide flares or the Bushwacker flares. The flares actually provide more clearance than stock. You may want to remove the wheel spacers you currently have and possibly get ones that are smaller, say .75 or .5 because otherwise even the widest flares may not cover the tires.

Welcome to the forum!

And your English was damn good.
Reply




All times are GMT -8. The time now is 10:27 AM.