Front axle ball joint removel tools.
03-16-2010, 02:31 PM
#2
JK Enthusiast
Join Date: Sep 2008
Location: omaha, ne
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
I just installed the DynaTrac ProSteer ball joints in mine this weekend.
The adapters for the press you need can be found in the Harbor Freight Master adapter set here: www*harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46389
You'll also need a C-Clamp press, of course.
I have the HF 4WD set; it does not have the right adapters. Also tried the loaner tool program at Advanced Auto...no luck. Had to get the "Master Set".
The DynaTrac installation sheet lists some Miller #'s
Miller Kit 6289
C-Clamp (Miller C4212F)
Press Tools (MIller 6289-1, 6289-3, 6289-4, 6289-5, 6289-12, 8975-2)
Hope that helps.
The adapters for the press you need can be found in the Harbor Freight Master adapter set here: www*harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46389
You'll also need a C-Clamp press, of course.
I have the HF 4WD set; it does not have the right adapters. Also tried the loaner tool program at Advanced Auto...no luck. Had to get the "Master Set".
The DynaTrac installation sheet lists some Miller #'s
Miller Kit 6289
C-Clamp (Miller C4212F)
Press Tools (MIller 6289-1, 6289-3, 6289-4, 6289-5, 6289-12, 8975-2)
Hope that helps.
03-16-2010, 03:31 PM
#3
JK Enthusiast
Join Date: Mar 2009
Location: Twin Falls Idaho
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
I just installed the DynaTrac ProSteer ball joints in mine this weekend.
The adapters for the press you need can be found in the Harbor Freight Master adapter set here: www*harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46389
You'll also need a C-Clamp press, of course.
I have the HF 4WD set; it does not have the right adapters. Also tried the loaner tool program at Advanced Auto...no luck. Had to get the "Master Set".
The DynaTrac installation sheet lists some Miller #'s
Miller Kit 6289
C-Clamp (Miller C4212F)
Press Tools (MIller 6289-1, 6289-3, 6289-4, 6289-5, 6289-12, 8975-2)
Hope that helps.
The adapters for the press you need can be found in the Harbor Freight Master adapter set here: www*harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46389
You'll also need a C-Clamp press, of course.
I have the HF 4WD set; it does not have the right adapters. Also tried the loaner tool program at Advanced Auto...no luck. Had to get the "Master Set".
The DynaTrac installation sheet lists some Miller #'s
Miller Kit 6289
C-Clamp (Miller C4212F)
Press Tools (MIller 6289-1, 6289-3, 6289-4, 6289-5, 6289-12, 8975-2)
Hope that helps.
03-16-2010, 04:07 PM
#4
JK Enthusiast
Join Date: Sep 2008
Location: omaha, ne
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
I would want the C-Clamp press. The adaptors have a ring ridge that keep them from sliding out of place on you. It took a lot of force to get my old lowers out (which had only been in 6 months) and I think it would have been pretty scary with a vise. fwiw