Front Axle Shifted Off To One Side, Need advice
JK Jedi Master
Joined: Jan 2008
Posts: 11,463
Likes: 165
From: Austin <--> Colorado Springs
and a caster kit, so I should be OK for now
Here is a great DIY alignment write-up:
http://project-jk.com/jeep-jk-write-...-end-alignment
Not too hard, but as the others said, you could make the dealership do it right if you want to waste more time back there.
Thread Starter
JK Newbie
Joined: Oct 2010
Posts: 58
Likes: 0
From: Franklin, TN
Very true. Not sure I want the same guy working on it again though. Years ago I did everything on my vehicles because I didn't trust anyone. I'm getting to that point again!
Thread Starter
JK Newbie
Joined: Oct 2010
Posts: 58
Likes: 0
From: Franklin, TN
Ewwww, you let them install Cams...
Here is a great DIY alignment write-up:
http://project-jk.com/jeep-jk-write-...-end-alignment
Not too hard, but as the others said, you could make the dealership do it right if you want to waste more time back there.
Here is a great DIY alignment write-up:
http://project-jk.com/jeep-jk-write-...-end-alignment
Not too hard, but as the others said, you could make the dealership do it right if you want to waste more time back there.
Thanks for the link bud.
Thread Starter
JK Newbie
Joined: Oct 2010
Posts: 58
Likes: 0
From: Franklin, TN
I adjusted my track bar today before I mounted my new M.O.R.E. front bumper, and it worked out great. I had just enough adjustment to center the axle. I ended up with the track bar at it's shortest length.
Thanks for the info, and for encouraging me to do it myself.
Thanks for the info, and for encouraging me to do it myself.
JK Enthusiast
Joined: Oct 2010
Posts: 358
Likes: 0
From: Lugoff, SC
At least I am not the only one with an lack for eyeballing.
