Currently in the middle of installing this long arm upgrade kit on my 2010 JKU Rubicon. The drivers side front control arm bracket is in the way of reinstalling the exhaust as the catalytic converter hits the bracket. In the supplied instructions it just says to remove exhaust and install bracket. Jeep is in pieces at my buddies house as I can either have control arms with no exhaust or no exhaust at all with control arms!

 

Have you called EVO?

 

It's Saturday they don't answer

 

Ken,just saw a note about the EVO long arm kit.Noted 2010's require exhaust cutting and rewelding.

 

You will need sleeves to fit over the exhaust cuts and weld them in.

Sent from my iPad using JK-Forum