Help with teraflex kit
#1
JK Newbie
Thread Starter
Join Date: Aug 2012
Location: Scottsbluff NE
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Help with teraflex kit
Looking at teraflex leavening kit any info befor I buy this one or anything else I might need
http://www.quadratec.com/products/16190_1100_07.htm
http://www.quadratec.com/products/16190_1100_07.htm
#2
JK Super Freak
Join Date: Oct 2007
Location: Keller, TX
Posts: 1,012
Likes: 0
Received 0 Likes
on
0 Posts
I prefer unleavened kits. I kid I kid.
The only problem with that kit is the price. Call David at Northridge4x4. I'm pretty sure he can beat that price easily.
Sent from my thingy.
The only problem with that kit is the price. Call David at Northridge4x4. I'm pretty sure he can beat that price easily.
Sent from my thingy.
Trending Topics
#8
JK Enthusiast
Join Date: Jul 2012
Location: Virginia
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
If you go this way, loosen your control arm bolts and trac bar bolts before install. Once you put the spacers in and the jk is on the ground, re-torque everything to 125 ft lbs.
#9
x2, but before you do torque everything to specs, it doesn't hurt to bounce all four corners of the jeep to help free any possible binding and helps settle things. I usually stand in the center of the front and rear bumpers and bounce the jeep using my weight...
#10
JK Enthusiast
Join Date: Jul 2012
Location: Virginia
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
X2. This will def help settle things.