JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion

Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Installing Evo Drag link flip kit

Thread Tools
 
Old Jul 10, 2012 | 09:44 PM
Share
  #1  
ninjajmoney's Avatar
ninjajmoney
Thread Starter
JK Freak
 
Joined: May 2009
Posts: 548
Likes: 0
From: Englewood, CO
Default Installing Evo Drag link flip kit
Like the title says... my question is, do I need to get an alignment after I do the install?
Reply
0
Old Jul 11, 2012 | 03:40 AM
Share
  #2  
DSOY's Avatar
DSOY
JK Newbie
 
Joined: Mar 2012
Posts: 71
Likes: 0
From: NEWPORT NEWS ,VA
Default
I was wondering the same. Probably going to do it soon.
Reply
0
Old Jul 11, 2012 | 04:20 AM
Share
  #3  
archijeff's Avatar
archijeff
JK Enthusiast
 
Joined: Sep 2008
Posts: 272
Likes: 1
From: Tampa, Florida
Default
Most likely yes, however I measured my drag link to the existing and didn't need to. There are lots of how-to on alignments that I suggest you read on this forum. If you do a lot of wheeling your alignment will constantly need to be checked. After a while you will easily be able to keep in check.
Reply
0
Old Jul 11, 2012 | 07:35 AM
Share
  #4  
EVO MFG's Avatar
EVO MFG
Sponsoring Manufacturer
 
Joined: May 2012
Posts: 385
Likes: 1
From: FULLERTON,CA
Default
Originally Posted by ninjajmoney
Like the title says... my question is, do I need to get an alignment after I do the install?
IF you are just installing the drag link flip, then NO. You will not need an alignment.
Reply
0
Old Jul 11, 2012 | 09:44 AM
Share
  #5  
69mach1's Avatar
69mach1
JK Freak
 
Joined: Jan 2011
Posts: 761
Likes: 0
From: Poway, California
Cool
Originally Posted by ninjajmoney
Like the title says... my question is, do I need to get an alignment after I do the install?
No alignment needed, just recenter your differential with the adjustable track bar and set your steering wheel straight via the drag link adjustment
Reply
0
Old Jul 11, 2012 | 07:27 PM
Share
  #6  
ninjajmoney's Avatar
ninjajmoney
Thread Starter
JK Freak
 
Joined: May 2009
Posts: 548
Likes: 0
From: Englewood, CO
Default
Thanks for the quick responses.
Reply
0
Back to Subforum
Modified JK Tech
View Next Unread
2.5 lift vs 3.0 " lift




Advanced Search

All times are GMT -8. The time now is 06:41 AM.