Hopefully someone here can help me, I recently installed a pair of JK rubicon axles into my 2004 Grand Cherokee Overland. I've got pretty much everything working including ABS, spedometer, and parking brake. All I have left is to complete the locker wiring, but I've run into a snag.

I read over all the threads I could find, and the locker mod thread but it doesn't contain the information that I'm looking for.

Basically I'm looking for the pinout details for the locker connectors for both the solenoid and sensor connectors.

Does anyone have the connector pinouts?

Also, the wiring diagrams seem to have disappeared from this thread

https://www.jk-forum.com/forums/show...=locker+wiring

Thanks in advance

 

I used some wire terminals from Pep Boys to make the connections on mine, and used shrink wrap to make the plug. I don't think polarity is an issue...Either that or I got lucky twice. I am not using the locker sensor at all, but I think it just closes a circuit so it shouldn't matter either. Just FYI- the actuator plug is the one on top, and the sensor plug is on the back. I may have the diagrams on my PC at home. Send me a PM to remind me and I will try to send them to you. Good luck.