Longarm up front only?
So I'm getting ready to deploy and I'm getting my build plans together. First this is what I've got now.
3" Teraflex full flex arm lift
Fox shocks with resi
Teraflex speed bumps
Coast drivelines
This is what I want to go to
Rock Krawler Coilovers (Front)
Rock Krawler 3 Link rear
Now that is pretty much my budget with a little bit of wiggle room. What I keep looking at and hearing is that I should do a longarm kit instead or try to swing it at the sametime as the coilovers. My question is can I just wrong longarms up front since I am doing coilovers up front?
3" Teraflex full flex arm lift
Fox shocks with resi
Teraflex speed bumps
Coast drivelines
This is what I want to go to
Rock Krawler Coilovers (Front)
Rock Krawler 3 Link rear
Now that is pretty much my budget with a little bit of wiggle room. What I keep looking at and hearing is that I should do a longarm kit instead or try to swing it at the sametime as the coilovers. My question is can I just wrong longarms up front since I am doing coilovers up front?
What travel coilovers and what lift height? I see no problem doing it at all. If you want long arm do it up, but just keep in mind long arms are not needed nearly as much in jk as they were in tjs.
Found this and thought you might find this interesting. This goes back to our conversation around the fire Saturday.
https://www.jk-forum.com/forums/modi...t-kits-222079/
Post #7 from Wayoflife is pretty much exactly what I was talking about.
https://www.jk-forum.com/forums/modi...t-kits-222079/
Post #7 from Wayoflife is pretty much exactly what I was talking about.
Last edited by mdash; Oct 21, 2013 at 02:40 PM.



