I'll be putting some new tires on my stock rims in the next little bit and had planned to get some spacers, i'm curious though if 285/70/17 tires would fit without spacers? Anyone have any idea? I think it'll look better with spacers either way...

 

Are you staying with the stock rims or are you going with a set with an offset in them? If you stay with the stock rims you should put some in specially if you do not have a lift.

 

I put a set of 1 1/4" spacers on mine with 305/65/17 tires on the stock rims... Don't know for sure if they were "necessary", but you'll definately like the looks of it once the tires are pushed out a little more

 

I was running 285-70-17 tires on the stock rims and the 2.5" BB w/o wheel spacers. The right rear tire had left a small rubbed area inside the wheelwell just above the frame after wheeling . It wasn't noticeable at the time, but I've got spacers now. It wasn't a problem on the street without the wheel spacers.

 

get spacers, you will rub with those tires on stock rims...check my profile

 

Get the spacers, mine rubbed drivers side rear. I did a test first whith it all mounted up and she no fit. Had to dismount it and wait for the spacers. good luck