New Drive shaft questions??
Thread Starter
JK Enthusiast
Joined: Sep 2007
Posts: 108
Likes: 0
From: Pineville KY
New Drive shaft questions??
I got my coast 1310 front driveshaft today from Dave at northridge, it came with new yokes. Is there anything speacil that I need to know about installing it with the new yokes on the transfercase and axle ends.
JK Freak
Joined: Aug 2009
Posts: 700
Likes: 0
From: Mason, Ohio
Yes, the pinion preload is set with crush bearings and not shims. The procedure is a bit more complicated. There is a very good (and long) write up on it. To sum it up you have to figure out the pinion preload and try to mimic it when installing the new pinion yokes.
JK Enthusiast
Joined: Dec 2008
Posts: 126
Likes: 0
From: Camby, IN
maybe this thread will help https://www.jk-forum.com/forums/jk-write-ups-39/installing-je-reel-1350-rear-driveshaft-28160/
Sorry have to copy and paste. Don't know how to make a link.
I have rode Quads and Rhino's on Pine mountain. Cool place to ride
Sorry have to copy and paste. Don't know how to make a link.
I have rode Quads and Rhino's on Pine mountain. Cool place to ride
Last edited by Piginajeep; Feb 23, 2010 at 05:12 PM. Reason: fixed link
JK Freak
Joined: Aug 2009
Posts: 700
Likes: 0
From: Mason, Ohio
That's the thread I was thinking of. (And was too lazy to search for 
)
Linky: https://www.jk-forum.com/forums/showthread.php?t=28160
)Linky: https://www.jk-forum.com/forums/showthread.php?t=28160