You won't need spacers unless you keep your stock wheels. If you get aftermarket wheels with 4.5" or less of BS you don't need spacers.

 

Oh thanks I thought those were the stock wheels. As far as BS goes is a wheel with 4.7" gonna mess things up?

 

Mine with 295/70/17 Nitto TG

 

No. My wheels have 4.75" of BS and no rubbing. Well it did rub on that plastic arm dam at the bottom of the stock bumper. You can however remove it or just trim what you need to. I eventually went to a JCR bumper so didn't have to worry about it anyway.

 

I got TF level kit (hockey pucks) 2" front/ 1" read on 34s duratracs. I hope this helps. I got a '12 JKUR btw and cut pinch seams and 4.5" backspace rims.

 

Nice I have the same TF lift and thanks to your post as I have been looking for a rig with this lift plus 34 and flat fenders. Do you have any side photos?

Thanks

 

Mine with 2.5 lift and Cooper STT.

 

I have an 08 jku with 285/75/17 toyo mt and teraflex 2.5 coil lift and 1" spacers all around.

 

Do yourself a favor. Go to 35" with the 2.5" teraflex bb. You will have zero regrets.

 

305-70-17 about 33.5 tall x 11.75 wide