Awesome! Glad it worked out for you. Plasti dip is easy to work with. Just start off very light. You will see you fender color for the first two or three coats. That's fine don't worry. After you have those initial coats you can go heavier. It took me just under three cans to do my fenders. If you mess up just let it dry peel it off and start over.

 

Sounds good... thanks again

 

Thanks only have one have to pick up another

 

One should be more than enough honestly

 

Just FINALLY got two cans of it... It gets sold out pretty quick I guess.. but I'm going to paint the cowls either tonight or tomorrow.. I sorta need to rotate my tires, and think that will be better to do at night.. what do you guys think... tires or plastip tonight?

 

May even tape it off and spray the first coat, then start rotating.. and spray a coat every 30min or so...

 

As long as you do light coats it dries really quick. Let me know how it turns out.

 

I used less than one can on the grill, got 4 coats.

 

I told ya plasti dip, thats what I did my lights with

 

So, when I spray this, just do light coats for every coat.. and do about 4 coats?