PRESS RELEASE: Off Road Evolution SBS Shifter/Plug NOW AVAILABLE!!
Sponsoring Vendor
Off Road Evolution Rep
Off Road Evolution Rep
Joined: Feb 2008
Posts: 3,068
Likes: 0
From: Fullerton, Ca.
I stopped by Offroad Evolution today to pick one up. I had the honor of Mel installing mine. 
For those of you wondering if it will work with the Daystar lower switch panel, the answer is yes! Thanks to Offroad Evolution for another high quality ( multi ) functional product.
For those of you wondering if it will work with the Daystar lower switch panel, the answer is yes! Thanks to Offroad Evolution for another high quality ( multi ) functional product.
Sponsoring Vendor
Joined: Sep 2006
Posts: 1,626
Likes: 1
From: Fullerton CA
Install
Here is an overview of the install.
It literally takes two minutes and it works with the Daystar Switch Panel.
If you are local, swing by and we will put it on for you!
Check it out...
Grab factory shifter in N or 4L and twist and pull straight up. No tools needed.
Slide SBS on with ORings install in grooves and the two screws partially threaded into the SBS.
Tighten Screws (~84 in/lbs). Or the German Torque Method: Goodentight!
EVO...
PH:714-870-5515
It literally takes two minutes and it works with the Daystar Switch Panel.
If you are local, swing by and we will put it on for you!
Check it out...
Grab factory shifter in N or 4L and twist and pull straight up. No tools needed.
Slide SBS on with ORings install in grooves and the two screws partially threaded into the SBS.
Tighten Screws (~84 in/lbs). Or the German Torque Method: Goodentight!
EVO...
PH:714-870-5515
JK Jedi
Joined: Mar 2009
Posts: 8,931
Likes: 6
From: San Marcos, CA
Here is an overview of the install.
It literally takes two minutes and it works with the Daystar Switch Panel.
If you are local, swing by and we will put it on for you!
Check it out...
Grab factory shifter in N or 4L and twist and pull straight up. No tools needed.
Slide SBS on with ORings install in grooves and the two screws partially threaded into the SBS.
Tighten Screws (~84 in/lbs). Or the German Torque Method: Goodentight!
EVO...
PH:714-870-5515
It literally takes two minutes and it works with the Daystar Switch Panel.
If you are local, swing by and we will put it on for you!
Check it out...
Grab factory shifter in N or 4L and twist and pull straight up. No tools needed.
Slide SBS on with ORings install in grooves and the two screws partially threaded into the SBS.
Tighten Screws (~84 in/lbs). Or the German Torque Method: Goodentight!
EVO...
PH:714-870-5515
So simple I think even I can tackle it
Will order today...
