JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion

Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Ram install

 
Old May 2, 2016 | 06:39 AM
Share
  #1  
Noroad's Avatar
Noroad
Thread Starter
JK Newbie
 
Joined: Apr 2016
Posts: 24
Likes: 3
From: Boston
Default Ram install
Finally got around to installing my Ram assist this weekend!
Attached Thumbnails Click image for larger version Name: on the lift.jpg Views: 136 Size: 69.4 KB ID: 645748   Click image for larger version Name: box first out.jpg Views: 144 Size: 62.9 KB ID: 645749   Click image for larger version Name: box wholes drilled.jpg Views: 139 Size: 90.1 KB ID: 645750   Click image for larger version Name: box fully tapped.jpg Views: 142 Size: 110.0 KB ID: 645751   Click image for larger version Name: cooler.jpg Views: 143 Size: 112.9 KB ID: 645752  

Click image for larger version Name: ram.jpg Views: 140 Size: 89.5 KB ID: 645753   Click image for larger version Name: rez.jpg Views: 127 Size: 65.4 KB ID: 645754  
Reply
0
Old May 2, 2016 | 07:34 AM
Share
  #2  
JKBud's Avatar
JKBud
JK Enthusiast
 
Joined: Feb 2013
Posts: 298
Likes: 0
From: Essex County, NJ
Default
Looks good. I'm pretty much done with my install, I just gotta hook up lines to my cooler and ram.
Reply
0
Old May 2, 2016 | 08:46 AM
Share
  #3  
Noroad's Avatar
Noroad
Thread Starter
JK Newbie
 
Joined: Apr 2016
Posts: 24
Likes: 3
From: Boston
Default
Originally Posted by JKBud
Looks good. I'm pretty much done with my install, I just gotta hook up lines to my cooler and ram.
thank man! thats not to much left u are almost done!
Reply
0
Old May 2, 2016 | 09:04 AM
Share
  #4  
ttechris's Avatar
ttechris
JK Freak
 
Joined: Feb 2011
Posts: 594
Likes: 0
From: Houston, TX
Default
Nice install! What ram are you using? I wanted to do the Ram assist on my new JK, but it appears PSC no longer sells the 1.75x6.75 cylinder I used on my last build.
Reply
0
Old May 2, 2016 | 12:57 PM
Share
  #5  
Noroad's Avatar
Noroad
Thread Starter
JK Newbie
 
Joined: Apr 2016
Posts: 24
Likes: 3
From: Boston
Default
Originally Posted by ttechris
Nice install! What ram are you using? I wanted to do the Ram assist on my new JK, but it appears PSC no longer sells the 1.75x6.75 cylinder I used on my last build.
thank you and I have 1.5 x 8inch PSC
Reply
0
Old May 14, 2016 | 09:53 AM
Share
  #6  
JKBud's Avatar
JKBud
JK Enthusiast
 
Joined: Feb 2013
Posts: 298
Likes: 0
From: Essex County, NJ
Default
What box do you have? I have a West Texas one and trying to figure out if I have my lines backwards or I need a new pump. I hooked the top port to the far side of the ram and the side port from the box to the closer side. Turning at idle is slightly tough but not horrible.
Reply
0
Back to Subforum
Modified JK Tech
View Next Unread
New Kid on the Block - Legato Performance


Thread Tools

Advanced Search

All times are GMT -8. The time now is 09:21 AM.