I went with the Teraflex $250 shipped from Northridge 4x4. Don't know about the others. I know that there have been complaints about Full tractions bushings failing, but other than that IDK. The TF arms are twice the weight of the stock arms, so they do seem alot beefier.

 

250 teraflex shipped from northridge4x4.com there are cheaper but they are crapppy quality and they are not supporters of this forum. Best deal hands down is TF at northridge4x4.com

Edit: As MKjeep said and yes the TF arms are 15 lbs on my bathrroom scale compared to the stockers at 7 lbs.

 

Will I need uppers and lowers or just front lowers?

 

Just lowers

 

X2.. I have had the toe-in fix wandering problems on other vehicles when nothing else would. It's a place to start that doesn't cost you anything.

 

Just the front lowers.

 

Which lowers? Teraflex or Currie?

 

Teraflex for the price, quality, and customer support!

 

Currie is the only one with Johnny Joints on both ends for the best articuation.

 

Make sure if you get the TF, check the install noter on the sponsering vendor forum or look at JulietKilo's write uP! A couple of us have installed them wrong, TF cleared this up for us