Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Teraflex 4" kit installed using 3" springs and shocks....

Thread Tools
 
Old Jul 24, 2007 | 05:32 PM
  #1  
Tom07JK's Avatar
Thread Starter
JK Enthusiast
 
Joined: Jan 2007
Posts: 167
Likes: 0
From: Austin, Texas
Default Teraflex 4" kit installed using 3" springs and shocks....

I had the Teraflex 4" kit installed on my JK. I had them substitute the 3" springs and shocks. This was after reading about how much lift some of the members here were getting with the 4" springs. I did some measuring and I got 4.5" of lift at the front bumper and 3.5" at the rear. This was measuring from the exact same point/angle with the stock BFG MT tires. I can always swap in the 4" springs and shocks later and all I have to do is adjust all of the links. Now I am debating my tire size. 35s would probably fit, but might rub with extreme flex. I might look for something closer to 34". This would also work better with my 4.10 gears..

My JK is a 4-door Rubicon. It currently has the hardtop installed. I will post some pics when we get a sunny day...

Later-
Reply




All times are GMT -8. The time now is 05:29 PM.