Trailhead deflators?
 

Anyone use these and do you like them?

Bump......

I use the Smittybilts. Three of mine work really good, one of them probably needs cleaned and adjusted. I like them, just screw them on and let them go. Most of the time, I can start back at the first one I put and start taking them off and doing a fine pressure adjustment right after putting them on.

I've found that the stock key works awesome

I have the tool to remove the shrader valve. I just thought the oasis trailheads was a good set up with the psi being set with an Allen. I figured someone must be using them

I borrowed a set from someone the other day and they were pretty helpful! Screw them on, walk away, come back in a few minutes and verify with a gauge and your all set!

I was reading you can drive with them on. Then take them off after they stop airing down.

Yes you can. I love mine!! I can set the to 5,8,11,12 whatever in about 30 sec

You can't go wrong with them!! I had the arb setup (nice but have to work on one tire at a time), then I had stauns (IMO they are overrated crap) I think the trailheads are top notch:beer:

Valve core remover tool and a tire gauge. Have all four done in less than 5 minutes and save some money.