Cargo Tiedowns are Standard Equipment
JK Freak
Joined: Apr 2007
Posts: 770
Likes: 0
From: Naples, fla.
Hey guys, I just found these and bought 12 of them.. (why not)
http://www.strapworks.com/Stainless_...ip_p/ssdrc.htm
Stainless 1" for the rear corner's.. awesome..
I will have 10 left so if any of you have been following my cargo tie downs, storage box mod posts/pic's etc.
PM me etc. and I will mail them out to 1st come 1st serve..
OF course, You will have to wait until they get here..
Kind of like buying you Guys a beer..!!!
http://www.strapworks.com/Stainless_...ip_p/ssdrc.htm
Stainless 1" for the rear corner's.. awesome..
I will have 10 left so if any of you have been following my cargo tie downs, storage box mod posts/pic's etc.
PM me etc. and I will mail them out to 1st come 1st serve..
OF course, You will have to wait until they get here..
Kind of like buying you Guys a beer..!!!
Last edited by captsam54; May 12, 2007 at 06:23 AM.
Thread Starter
JK Enthusiast
Joined: Jan 2007
Posts: 457
Likes: 0
From: Cool, CA
Hey guys, I just found these and bought 12 of them.. (why not)
http://www.strapworks.com/Stainless_...ip_p/ssdrc.htm
Stainless 1" for the rear corner's.. awesome..
I will have 10 left so if any of you have been following my cargo tie downs, storage box mod posts/pic's etc.
PM me etc. and I will mail them out to 1st come 1st serve..
OF course, You will have to wait until they get here..
Kind of like buying you Guys a beer..!!!
http://www.strapworks.com/Stainless_...ip_p/ssdrc.htm
Stainless 1" for the rear corner's.. awesome..
I will have 10 left so if any of you have been following my cargo tie downs, storage box mod posts/pic's etc.
PM me etc. and I will mail them out to 1st come 1st serve..
OF course, You will have to wait until they get here..
Kind of like buying you Guys a beer..!!!
JK Freak
Joined: Apr 2007
Posts: 770
Likes: 0
From: Naples, fla.
JK Enthusiast
Joined: Jan 2007
Posts: 208
Likes: 2
From: Northern Virginia
Okay, don't laugh me out of here....but how are you attaching the D-rings? I guess I am confused 
.... are you trying to use these in our so called "cargo slots" that are under the carpet flaps, or are you are just bolting these down to the bed. Please help....Oh, and pics would be great too if you already have them installed. I really need some tie downs back there. I now know to get the D-rings, just need to know where and how to put them in. Thanks.
.... are you trying to use these in our so called "cargo slots" that are under the carpet flaps, or are you are just bolting these down to the bed. Please help....Oh, and pics would be great too if you already have them installed. I really need some tie downs back there. I now know to get the D-rings, just need to know where and how to put them in. Thanks.
JK Freak
Joined: Jan 2007
Posts: 617
Likes: 0
From: Colorado
Okay, don't laugh me out of here....but how are you attaching the D-rings? I guess I am confused .... are you trying to use these in our so called "cargo slots" that are under the carpet flaps, or are you are just bolting these down to the bed. Please help....Oh, and pics would be great too if you already have them installed. I really need some tie downs back there. I now know to get the D-rings, just need to know where and how to put them in. Thanks.
.... are you trying to use these in our so called "cargo slots" that are under the carpet flaps, or are you are just bolting these down to the bed. Please help....Oh, and pics would be great too if you already have them installed. I really need some tie downs back there. I now know to get the D-rings, just need to know where and how to put them in. Thanks.https://www.jk-forum.com/forums/jk-write-ups-39/rear-cargo-tiedown-anchors-3809/
JK Freak
Joined: Apr 2007
Posts: 770
Likes: 0
From: Naples, fla.
Okay, don't laugh me out of here....but how are you attaching the D-rings? I guess I am confused .... are you trying to use these in our so called "cargo slots" that are under the carpet flaps, or are you are just bolting these down to the bed. Please help....Oh, and pic's would be great too if you already have them installed. I really need some tie downs back there. I now know to get the D-rings, just need to know where and how to put them in. Thanks.
.... are you trying to use these in our so called "cargo slots" that are under the carpet flaps, or are you are just bolting these down to the bed. Please help....Oh, and pic's would be great too if you already have them installed. I really need some tie downs back there. I now know to get the D-rings, just need to know where and how to put them in. Thanks.These I have been referring to I am putting in the very back and outboard corners as that is the best place to get the most volume of cargo secured.....
Fender washers are representing the D rings in the picture as the D rings are not here yet.
see pic: http://my.project-jk.com/data/624/thumbs/DSC01076.JPG
Drilling one Hole, and backing with a fender washer..
( fender washers are approx 2" washers with the hole just the size of the bolt your using..)
And make sure you put nylock nuts on so it won't loosen up and fall off..
When they get in I will be sending the alloted
's to the Lucky few !! And installing mine this coming week, will take pic's and post.. So stay tuned...
JK Super Freak
Joined: Apr 2007
Posts: 1,037
Likes: 0
From: Springfield, Oregon
These I have been referring to I am putting in the very back and outboard corners as that is the best place to get the most volume of cargo secured.....
Fender washers are representing the D rings in the picture as the D rings are not here yet.
see pic: http://my.project-jk.com/data/624/thumbs/DSC01076.JPG
Drilling one Hole, and backing with a fender washer..
( fender washers are approx 2" washers with the hole just the size of the bolt your using..)
And make sure you put nylock nuts on so it won't loosen up and fall off..
When they get in I will be sending the alloted's to the Lucky few !!
And installing mine this coming week, will take pic's and post.. So stay tuned...
Fender washers are representing the D rings in the picture as the D rings are not here yet.
see pic: http://my.project-jk.com/data/624/thumbs/DSC01076.JPG
Drilling one Hole, and backing with a fender washer..
( fender washers are approx 2" washers with the hole just the size of the bolt your using..)
And make sure you put nylock nuts on so it won't loosen up and fall off..
When they get in I will be sending the alloted
's to the Lucky few !! And installing mine this coming week, will take pic's and post.. So stay tuned...