So What Was Done to Your Jeep This Week?
JK Jedi
Joined: Oct 2010
Posts: 5,192
Likes: 3
From: REDONDO BEACH, CA
Swapped in & mounted my new factory front seats in the rear, then re-mounted buckles to factory location. Pretty comfy back there!
Note: I've got another set of front seats for sale if anyone is interested.
Note: I've got another set of front seats for sale if anyone is interested.
Last edited by TURTLECON; Apr 27, 2013 at 03:00 PM.
JK Freak
Joined: Dec 2008
Posts: 621
Likes: 1
From: Redondo Beach, Ca.
own links
Well reading the manual, put the Jeep level and loosened all the control arms and torqued them 125 lb. Replaced them oem's with Energy Bushings front and rear a few week's ago. It's a lot easier when on jack stands 
While I was under there adjusted the stainless steal sway bar links a friend has made for my 2" lift. Horizontal to the ground is what I was shooting for. Here's a picture of a rear link
While I was under there adjusted the stainless steal sway bar links a friend has made for my 2" lift. Horizontal to the ground is what I was shooting for. Here's a picture of a rear link
JK Enthusiast
Joined: Jul 2012
Posts: 478
Likes: 0
From: San Diego/Chula Vista
JK Jedi
Joined: Oct 2010
Posts: 5,192
Likes: 3
From: REDONDO BEACH, CA
Was adding some light guards and one headlight blew out, so replaced that with silverstars...
...and then tested ALL my lights to find one of my KC long range is dying/blown. So jumped on amazon to order replacement bulb. It's always something!
...and then tested ALL my lights to find one of my KC long range is dying/blown. So jumped on amazon to order replacement bulb. It's always something!
