Yes, you can do that... the bracket is the same either way.

 

Ramping up production soon? I really want this....

 

Yep!...

We actually plan to order on Monday, at which point we will start taking pre-orders. From start of production to shipping actual kits will be about 3-4 weeks. Probably closer to 3 weeks.

Final pricing and special introductory pricing will be displayed Monday, possibly even later today.

Thanks for all the interest guys, I know it has been a while to finally release this product. We just really want to make sure it is 100% before we release it to you guys.

 

Are we there yet?

 

On board air by RIPP....lmao.

Couldn't resist.

 

I think so.... we have to switch to a 2.5 gallon steel tank, which ended up being a little narrower. Working on the revised pricing, as it will be a little cheaper now. Any day now.....

 

Because of the tank change, we are finalizing pricing. It will end up being a 2.0 gallon tank. Smaller than we had hoped for, but will still work for air tools and everything else needed.

We will be posting up new retail pricing today, as well as special pre-order pricing.

 

We are all ready to go! We don't have the kits on the website yet but will post the details here with the intro pricing for forum members. Because this is fresh, we don't have a photo of the complete kit yet installed, but have done many test fits to ensure everything will work together.... as you can tell from our much later release date.

We will offer 7 different configurations of this system, including a tank only version for all the guys that have compressors without a tank on their Jeeps already. We didn't include wiring with this system because some people use sPod and don't want to have customer buy items they may not be using. Same with the inside switch, everyone has a preference for the inside switch, so we left it up to you guys.

All Systems are 150 PSI. The systems with regulators are for air locker use. The systems without tanks are just intended for tire inflation

Production is starting today, so please allow 3-4 weeks for us to ship the system. This special pricing will be valid for the next 2 weeks, until April 9th, 2013.
Shipping is a flat $40 for all systems.

PN 11015: Single Compressor System
$519.95 Regular ($470 Pre-Order Special)
- VIAIR 400C Compressor
- 2.0 Gallon Steel Tank
- Powder Coated Mounting Bracket
- Billet 6-Port Manifold
- 80a Relay
- Stainless Mounting Hardware
- 30 Ft. Nylon Fill Hose with Clip-On Tire Chuck
- Remote Mounted Coupler with Powder Coated Mounting Bracket
- All Misc. DOT approved fittings included
- 25 Ft. of 1/4" DOT approved air line
- Misc. Electrical connectors for relay

PN 11025: Dual Compressor System
$684.95 Regular ($620 Pre-Order Special)
- Dual VIAIR 400C Compressors
- 2.0 Gallon Steel Tank
- Powder Coated Mounting Bracket
- Billet 6-Port Manifold
- 80a Relay
- Stainless Mounting Hardware
- 30 Ft. Nylon Fill Hose with Clip-On Tire Chuck
- Remote Mounted Coupler with Powder Coated Mounting Bracket
- All Misc. DOT approved fittings included
- 25 Ft. of 1/4" DOT approved air line
- Misc. Electrical connectors for relay

PN 11115: Single Compressor System w/ Regulator
$559.95 Regular ($505 Pre-Order Special)
- VIAIR 400C Compressor
- 2.0 Gallon Steel Tank
- Powder Coated Mounting Bracket
- Billet 6-Port Manifold
- 80a Relay
- Regulator w/ BSP fittings for air locker solenoids
- Stainless Mounting Hardware
- 30 Ft. Nylon Fill Hose with Clip-On Tire Chuck
- Remote Mounted Coupler with Powder Coated Mounting Bracket
- All Misc. DOT approved fittings included
- 25 Ft. of 1/4" DOT approved air line
- Misc. Electrical connectors for relay

PN 11125: Dual Compressor System w/ Regulator
$724.95 Regular ($655 Pre-Order Special)
- Dual VIAIR 400C Compressors
- 2.0 Gallon Steel Tank
- Powder Coated Mounting Bracket
- Billet 6-Port Manifold
- 80a Relay
- Regulator w/ BSP fittings for air locker solenoids
- Stainless Mounting Hardware
- 30 Ft. Nylon Fill Hose with Clip-On Tire Chuck
- Remote Mounted Coupler with Powder Coated Mounting Bracket
- All Misc. DOT approved fittings included
- 25 Ft. of 1/4" DOT approved air line
- Misc. Electrical connectors for relay

PN 11315: Single Compressor System w/o Tank
$424.95 Regular ($385 Pre-Order Special)
- VIAIR 400C Compressor
- Powder Coated Mounting Bracket
- Billet 6-Port Manifold
- 80a Relay
- Regulator w/ BSP fittings for air locker solenoids
- Stainless Mounting Hardware
- 30 Ft. Nylon Fill Hose with Clip-On Tire Chuck
- Remote Mounted Coupler with Powder Coated Mounting Bracket
- All Misc. DOT approved fittings included
- 25 Ft. of 1/4" DOT approved air line
- Misc. Electrical connectors for relay

PN 11325: Dual Compressor System w/o Tank
$614.95 Regular ($555 Pre-Order Special)
- Dual VIAIR 400C Compressors
- Powder Coated Mounting Bracket
- Billet 6-Port Manifold
- 80a Relay
- Regulator w/ BSP fittings for air locker solenoids
- Stainless Mounting Hardware
- 30 Ft. Nylon Fill Hose with Clip-On Tire Chuck
- Remote Mounted Coupler with Powder Coated Mounting Bracket
- All Misc. DOT approved fittings included
- 25 Ft. of 1/4" DOT approved air line
- Misc. Electrical connectors for relay

PN 11405: Tank Only w/ Mounting Bracket
$244.95 Regular ($220 Pre-Order Special)
- Powder Coated Mounting Bracket
- 2.0 Gallon Steel Tank
- Stainless Mounting Hardware
- Remote Mounted Coupler with Powder Coated Mounting Bracket
- All Misc. DOT approved fittings included
- 40 Ft. of 1/4" DOT approved air line

 

To make sure I understand this...this kit went from a 3 gallon aluminum tank, to a 2.5 gallon steel one, and now to a 2 gallon steel one?
Where are the drains going to be located now that this is a rust prone tank?

Frank

 

Are they all still going to use the same bracket? So, I could say buy the dual compressor system without the tank, run them through the manifold for the time being, and then add a tank later on if I want to run air tools?

Sorry, I'm really not great with this stuff. I'd never get anything installed on my jeep if it weren't for the help of a few friends.