JKS Manufacturing giving away an all new JSPEC 2" lift sytem!!
07-02-2012, 01:07 PM
#1
Sponsoring Manufacturer
Thread Starter
Join Date: Aug 2008
Location: Alliance, NE
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
JKS Manufacturing giving away an all new JSPEC 2" lift sytem!!
We here at JKS/JSPEC were looking for a way to celebrate our nations independence. Since baked beans aren't really our thing, we instead opted to giveaway one lift kit to one lucky fan of either of our facebook pages. The giveaway will also celebrate JKS/JSPEC's continued use and production of American made parts. The giveaway begins July 4th and our last day to submit entry will be July 31st. The winner gets their choice of any 2" kit from Standard, Sport, or Spec. Packages and combinations can be seen here: JSPECUSA. **Shocks are not included with giveaway**
Requirements:
1) Must own a Jeep JK Wrangler
2) Must "like" and post a photo of your Jeep (as it sits now) on the JSPEC facebook page .
3) Enter on JKS page and double your chances of winning!!
4) Only one entry per page or you'll be disqualified from the giveaway.
Random selection software will be used for the giveaway. We'll announce here and on our facebook page the winner on the 31st.
Picture of our 4-door with Spec kit installed and an action shot of the potential kit you could be winning:
GOOD LUCK ALL AND HAPPY INDEPENDENCE DAY!!!
Requirements:
1) Must own a Jeep JK Wrangler
2) Must "like" and post a photo of your Jeep (as it sits now) on the JSPEC facebook page .
3) Enter on JKS page and double your chances of winning!!
4) Only one entry per page or you'll be disqualified from the giveaway.
Random selection software will be used for the giveaway. We'll announce here and on our facebook page the winner on the 31st.
Picture of our 4-door with Spec kit installed and an action shot of the potential kit you could be winning:
GOOD LUCK ALL AND HAPPY INDEPENDENCE DAY!!!
Last edited by JKS Manufacturing; 07-02-2012 at 01:09 PM.
07-02-2012, 01:48 PM
#3
Sponsoring Manufacturer
Thread Starter
Join Date: Aug 2008
Location: Alliance, NE
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Nice try, no photoshopping was done on that image. That was taken at this years EJS on poison spider. I'll toss us some sequence shots for the doubters.
The driver tire handing out over the notch does give it a weird look, I'll give you that!
The driver tire handing out over the notch does give it a weird look, I'll give you that!
Last edited by JKS Manufacturing; 07-02-2012 at 02:18 PM.
07-04-2012, 11:14 AM
#5
Sponsoring Manufacturer
Thread Starter
Join Date: Aug 2008
Location: Alliance, NE
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Happy 4th of July all. We're officially accepting your photo submissions now. All early entries will be counted too.
Good luck in the drawing!!
Good luck in the drawing!!
