Notices
Stock JK Tech Bulletin board forum regarding issues with OE (original equipment) components of the Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) such as factory suspension parts, engine, transmission, body parts, interior fixtures and the on-board computer.

Add power windows?

Thread Tools
 
Old Nov 21, 2009 | 08:01 AM
  #1  
dali555's Avatar
Thread Starter
JK Enthusiast
 
Joined: Oct 2009
Posts: 182
Likes: 0
From: New Milford, CT
Default Add power windows?

I've seen a great write up of adding cruise control on here. Anyone add power windows? I have an 08 Unlimited X that is bare bones and would like to add PW. Any ideas????
Reply
Old Nov 21, 2009 | 09:41 AM
  #2  
Brian08JK's Avatar
JK Enthusiast
 
Joined: Aug 2009
Posts: 183
Likes: 0
From: Canby, OR
Default

I am also interested in this..... Has it been done? I would attempt it myself but i am not sure what the true cost would be. Connecters, pcm flash, door panels, center panel, switches.....
Reply
Old Nov 21, 2009 | 11:02 AM
  #3  
JK Super Freak
 
Joined: Aug 2009
Posts: 1,255
Likes: 2
From: GRANDE PRAIRIE, AB
Default

ANYTHING IS POSSIBLE!! might be easier to get a set of doors from the wrecker loaded with power windows then just buy the switches and wire it up
Reply
Old Nov 21, 2009 | 11:31 AM
  #4  
BlackNorthernJK's Avatar
JK Super Freak
 
Joined: Mar 2008
Posts: 1,673
Likes: 3
From: Alberta
Default

ah yes...my first post https://www.jk-forum.com/forums/jk-electrical-lighting-sound-systems-13/anyone-intersted-aftermarket-power-windows-33231/
Reply
Old Nov 21, 2009 | 11:38 AM
  #5  
armybiker's Avatar
JK Newbie
 
Joined: Nov 2009
Posts: 9
Likes: 0
From: Ft. Hood Texas
Default

There is always..... http://www.youtube.com/watch?v=GLsyM2Crhew
Reply
Old Nov 21, 2009 | 11:57 AM
  #6  
BlackNorthernJK's Avatar
JK Super Freak
 
Joined: Mar 2008
Posts: 1,673
Likes: 3
From: Alberta
Default

Originally Posted by Brian08JK
I am also interested in this..... Has it been done? I would attempt it myself but i am not sure what the true cost would be. Connecters, pcm flash, door panels, center panel, switches.....
You could always go that route if you were really intent on a 'from the factory' look....but A1 electrics kit is a complete drop in kit that has all the connectors and switches, no need to flash anything...they provide plugs for the regulator handle holes, but if you were really really picky you could buy new interior door panels for 80 bucks a pop
Reply




All times are GMT -8. The time now is 05:25 PM.