Notices
Stock JK Tech Bulletin board forum regarding issues with OE (original equipment) components of the Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) such as factory suspension parts, engine, transmission, body parts, interior fixtures and the on-board computer.

Anyone have pic's of jk mopar 1/2 doors?

Old May 21, 2010 | 02:06 PM
  #1  
DJSJK50's Avatar
Thread Starter
JK Enthusiast
 
Joined: Jun 2009
Posts: 378
Likes: 0
From: Colorado Springs, CO
Default Anyone have pic's of jk mopar 1/2 doors?

I was wondering what it looks like with the side panels on. If anyone that has one can supply pic's I would appreciate it. I typically drive with the windows down. So I would probably do the same. We have tons of TJ's and they have diferant sides. One of them, the sides are like 1/2 zipped off and really looks bad. Others look good. Our dealers don't have any samples on the lot yet. So, I was wonderng.

Thanks in advance.
Reply
Old May 21, 2010 | 05:40 PM
  #2  
countrydude1992's Avatar
JK Freak
 
Joined: Aug 2009
Posts: 522
Likes: 1
From: Tuscaloosa, AL
Default

COP4x4 put them on their latest build.



there here's one with the top part of the door on the ground by the rear tire. no installed pics that i've found though.

Reply
Old May 21, 2010 | 05:45 PM
  #3  
Bowman's Avatar
JK Enthusiast
 
Joined: Feb 2010
Posts: 146
Likes: 0
From: Denham Springs, LA
Default

Tops on


Tops off
Reply
Old May 21, 2010 | 05:46 PM
  #4  
dmhines's Avatar
JK Super Freak
 
Joined: Apr 2009
Posts: 1,633
Likes: 0
From: Forsyth County, GA
Default

Not sure what you are asking ... hows does it look with uppers on do you mean? If that is what you mean here's mine ...

Reply
Old May 24, 2010 | 08:27 AM
  #5  
DJSJK50's Avatar
Thread Starter
JK Enthusiast
 
Joined: Jun 2009
Posts: 378
Likes: 0
From: Colorado Springs, CO
Default

Yes, that is what I am looking for. The diveres upper side panel.

dmhines; Is that a single piece? Like you have to take it off to "roll the window down" sort of speck.

Thanks all for the pic's. I went to the deal over the weekend thay did not have any samples to look at.
Reply
Old May 24, 2010 | 08:44 AM
  #6  
DJSJK50's Avatar
Thread Starter
JK Enthusiast
 
Joined: Jun 2009
Posts: 378
Likes: 0
From: Colorado Springs, CO
Default

Yes, that is what I am looking for. The diveres upper side panel.

dmhines; Is that a single piece? Like you have to take it off to "roll the window down" sort of speck.

Thanks all for the pic's. I went to the deal over the weekend thay did not have any samples to look at.
Reply
Old May 24, 2010 | 08:57 AM
  #7  
Bowman's Avatar
JK Enthusiast
 
Joined: Feb 2010
Posts: 146
Likes: 0
From: Denham Springs, LA
Default

You can either unzip the plastic window and fold it down, or remove the entire upper door (the black part in the picture). You can see in the pic that I posted what it looks like with the plastic zipped or unzipped.
Reply
Old May 24, 2010 | 09:38 AM
  #8  
bananas's Avatar
JK Newbie
 
Joined: Jan 2009
Posts: 45
Likes: 0
From: Orange County, CA
Default

Originally Posted by DJSJK50
I was wondering what it looks like with the side panels on. If anyone that has one can supply pic's I would appreciate it. I typically drive with the windows down. So I would probably do the same. We have tons of TJ's and they have diferant sides. One of them, the sides are like 1/2 zipped off and really looks bad. Others look good. Our dealers don't have any samples on the lot yet. So, I was wonderng.

Thanks in advance.


The windows lift straight up and are very easily removed from the half doors.



Reply
Old May 24, 2010 | 09:52 AM
  #9  
DJSJK50's Avatar
Thread Starter
JK Enthusiast
 
Joined: Jun 2009
Posts: 378
Likes: 0
From: Colorado Springs, CO
Default

Ah.... ok... I get it.

@Bowman I missed on your pic that back window was unzipped.

Thanks everyone.... just showed the wife all the pic's, and she is digging it. So, now I have to save for the $1200 for the doors. I have the 2 door... and she just loved the way it look on it.
Reply
Old May 24, 2010 | 10:04 AM
  #10  
Bowman's Avatar
JK Enthusiast
 
Joined: Feb 2010
Posts: 146
Likes: 0
From: Denham Springs, LA
Default

Awesome! Can't wait to see it.
Reply


All times are GMT -8. The time now is 12:00 PM.